Laguna Seat - Thruxton 1200
CB12729 / 20
€649.95*
At last there is a real cafe racer seat for the Triumph Thruxton 1200 models! Yes, the original seat with hump cap is stylish, but a real cafe racer needs a seat with a continuous side line from the tank to the hump, paired with a nice flat seat cushion. That's exactly what the Laguna Seat is! The seat in combination with a short rear end gives your Thruxton a completely new look. The end of the hump rises slightly, creating a sporty look.
The Laguna Seat is a high-quality seat that is very well made. High-quality materials paired with excellent craftsmanship. The seat can be plug & play replaced with the original seat.
For the perfect look on your Thruxton, we recommend fitting a short rear end. Our rear wake kit is the perfect match for the Laguna Seat. You can find the rear under accessories in this product description.
Luggage rack - Scrambler 900
CB12713 / 601
€259.00*
This aluminum luggage rack is mounted in place of the original Sizus seat cushion. Installation is very simple with 3 screws.
The bridge gives the rear of the Scrambler a much nicer look and is also practical if you want to put some luggage on the back.
The part can also be coated black at the customer's request. Please contact us for more information.
Cafe Racer Seat - Speed Twin 1200
CB12627 / 600
€329.95*
Diese Motone Sitzbank für alle Triumph Speed Twin 1200 Modelle, verleiht deinem Motorrad durch den leicht angedeuteten Höcker einen sportlichen Cafe Racer Look.
Die Sitzbank kann Plug & Play gegen die originale ausgetauscht werden. Motone verwendet bei all seinen Sitzbänken ein hochwertiges, strapazierfähiges Kunstleder. Außerdem wir ein sehr guter Schaumstoff verwendet, um hohen Sitzkomfort zu gewährleisten.
Die Sitzbank ist von vorne bis hinten durchgepolstert, sprich es ist möglich auch mal einen Beifahrer mitzunehmen.
Drop Seat Kit
CB12618M / 2
From
€249.00*
Eine neu gestaltete, minimalistische Sitzhalterung mit zwei einstellbaren Positionen, die den Sitz um bis zu 4 cm absenkt und der Bobber eine völlig neue Fahrzeuglinie verleiht. Handgefertigt aus Edelstahl, präzise mit Wig verschweißt und abschließend schwarz pulverbeschichtet.Made in Germany by KRT Framework.
Das DropSeat-Kit eliminiert einen optischen Makel, der Marvin von KRT gleich ein Dorn im Auge war als er die Bobber das erste mal gesehen hat: Der originale Sitz ist bequem und fahrfreundlich, der große Abstand zwischen Sitz und Heckfender für unser Empfinden aber unschön. Auch wenn die Bobber keinen Starrahmen hat wie ihr Vorbild aus den 50ern, sollte der Sitz etwas tiefer und damit näher am Hinterrad positioniert sein, um ein stimmiges Gesamtbild zu ergeben. Deshalb entschieden wir uns, das Problem anzugehen, ohne die Grundidee einer Bobber zu verändern.Außerdem entfällt der unschöne, nach hinten überstehendem Teil der originalen Sitzhalterung.
Das Ergebnis ist unser DropSeat-Kit. Eine neue Sitzhalterung mit zwei einstellbaren Höhen. Die erste Position entspricht nahezu der originalen, die zweite Stellung bringt eine 4 cm-Tieferlegung mit sich. Bequem zu fahren ist sie trotzdem (natürlich kommen hier Körpergröße und Physiognomie zum Tragen). So kannst du ohne Originalteile bei Bedarf den Sitz wieder höher legen – z.B. für längere Touren.
Das DropSeat-Kit wird aus Edelstahl gefertigt, selbst wenn die Pulverbeschichtung beschädigt wird, musst du Rost also nicht fürchten. Besonders wichtig für diejenigen, die ohne oder mit sehr kurzen Kotflügeln fahren. Um die Haftung der Pulverbeschichtung bei häufiger Verstellung der Sitzposition zu gewährleisten, wird das Kit vor dem Beschichten sandgestrahlt.
Die visuelle Wirkung des DropSeat-Kits entfaltet sich besonders eindrucksvoll in Verbindung mit einem kompakten Sitz wie dem Triumph Statement Sitz. Unsere Sitzhalterung zeichnet sich zudem dadurch aus, dass sie sich elegant in das Heck einfügt und nicht, wie die Originalhalterung, hinten unter dem Sitz hervorsteht.Passt auch mit allen anderen Zubehör Sitzen für die Bobber.
Hinweis zu den Produktbildern: Schaut euch diese in groß an, denn es sind einige GIF Dateien (Bewegtbilder, um euch den Höhen Unterschied besser zu verdeutlichen).
Greaser Sitzbank - Bonneville / Street
CB12449M / 0
From
€449.00*
A very nice & slim two man seat in a slightly sportier design.
The seat is cut slightly narrower than the original seat and thus provides a slimmer line in the rear area of your Triumph.Through the slightly indicated hump, your bike gets a slightly sportier look, which looks great together with a HeckWeck kit.
The Crafton seats are made of very high quality leatherette. The leatherette offers almost only advantages over real leather. On the one hand it looks almost exactly like real leather, on the other hand imitation leather is much easier to clean.To provide a high level of seating comfort, extra high-density foam is used as padding.In the seating area, the bench is processed a rough imitation leather, which looks very similar to Alcantara. This not only looks very nice, but is also very comfortable to ride because you don't slide on the seat at all.
The seat can be easily plug & play within a few seconds against the original seat exchanged.
The scope of delivery also includes a rain cover for the seat.
Dimensions: Length: 71cmWidth: 28cmHeight: 10,5cm
Crafton Atelier - the manufacturer
Crafton is a young and dynamic company that has set its focus on producing perfect seats for our beloved Modern Classic Triumphs. Crafton uses only very high-quality materials for both the seat covers and the seat cushions. The result is beautifully shaped benches that have an elegant surface and offer an extremely high level of seating comfort.
Rambler Sitzbank - Bonneville / Street
CB12562M / 0
From
€449.00*
A very beautiful and slim double seat bench in a classic cross-seam design.
The seat is narrower than the original seat and thus ensures a slimmer line at the rear of your Triumph.
The Crafton seat is made of high-quality imitation leather. Synthetic leather has almost only advantages over real leather. On the one hand, it looks almost exactly like real leather, and on the other, artificial leather is much easier to care for.To ensure a high level of seating comfort, extra high-density foam is used for the upholstery.In the seating area, the bench is covered with a slightly rough material that looks a little like Alcantara. On the one hand, this looks very attractive and, on the other, ensures a very good grip on the bench. The rough material in combination with the smooth leather at the end of the bench creates a very elegant, casual look.
On the underside of the seat there is a very practical strap on the left and right for attaching luggage (see photo).
The seat can be easily replaced with the original seat in just a few seconds using Plug & Play.
A rain cover for the seat is included in the scope of delivery.
Dimensions Length: 71cmWidth: 28cmHeight: 10.5cm
Crafton Atelier - the manufacturer
Crafton is a young and dynamic company that has set its focus on producing perfect seats for our beloved Modern Classic Triumphs. Crafton uses only very high-quality materials for both the seat covers and the seat cushions. The result is beautifully shaped benches that have an elegant surface and offer an extremely high level of seating comfort.
Street Tracker Seat
CB12532 / 5
€489.95*
Flat Tracker style seat suitable for Street Twin / Scrambler / Cup - Speed Twin 900 / Scrambler 900 - Bonneville T100 / T120.
The seat gives your bike a whole new style! In classic Flat Track style, the Street Tracker Seat gives your bike a narrow, pointed and short tail.The seat is made of high quality injection moulded ABS and painted gloss black. The Street Tracker Seat can be exchanged 1 to 1 with the original seat and also works with the original wing. However, we would recommend a rear conversion to the seat in order to have the cleanest possible rear end. Our recommendation here would be our rear Weck Kit, which provides a completely free rear (see accessory article in this description).
Rambler seat - Scrambler 1200
CB12411M / 0
From
€495.00*
A very nice & slim two man seat suitable for Triumph Scrambler 1200 models in the classic cross stitching design.
The seat is cut narrower than the original seat and thus provides a slimmer line in the rear area of your Triumph Scrambler.
The Crafton bench seats are made from very high quality faux leather. The faux leather offers almost nothing but advantages over genuine leather. On the one hand, it looks almost exactly like real leather, and on the other hand, imitation leather is much easier to care for.In order to provide high seating comfort, extra high density foam is used as padding.The seat is available in black, brown or black Velverte. In the Velverte version, a rough imitation leather is processed in the seat area, which looks very similar to Alcantara.
At the bottom of the seat base plate is each left & right a very practical tab to attach luggage (see photo).
The seat can be easily plug & play within a few seconds against the original seat exchanged.
The scope of delivery also includes a rain cover for the seat.
Dimensions: Length: 64cmWidth: 24cmHeight: 9cm
Crafton Atelier - the manufacturer
Crafton is a young and dynamic company that has set its focus on producing perfect seats for our beloved Modern Classic Triumphs.
Crafton uses only very high-quality materials for both the seat covers and the seat cushions. The result is beautifully shaped benches that have an elegant surface and offer an extremely high level of seating comfort.
Greaser seat - Thruxton 1200
CB12412M / 0
From
€449.00*
A beautiful, slim & high quality processed two man seat suitable for Triumph Thruxton 1200 models.Available in cross stitching (Ripped) or Diamond design.
The seat is cut narrower than the original seat and thus provides a slimmer line in the rear area of your Triumph Thruxton 1200.
The Crafton bench seats are made from very high quality faux leather. The faux leather offers almost nothing but advantages over genuine leather. On the one hand, it looks almost exactly like real leather, and on the other hand, imitation leather is much easier to care for.To provide a high level of seating comfort, extra high density foam is used as padding.The seat is available in black, brown or black Velverte. In the Velverte version, a rough imitation leather is processed in the seat area, which looks very similar to Alcantara.
The seat can be simply plug & play within a few seconds against the original seat exchanged.
The scope of delivery also includes a rain cover for the seat.
Dimensions: Length: 65cmWidth: 28cmHeight: 8cm
Crafton Atelier - the manufacturer
Crafton is a young and dynamic company that has set its focus on producing perfect seats for our beloved Modern Classic Triumphs. Crafton uses only very high-quality materials for both the seat covers and the seat cushions. The result is beautifully shaped benches that have an elegant surface and offer an extremely high level of seating comfort.
Rambler seat - Speed Twin 1200
CB12413.1M / 0
From
€449.00*
A very nice & slim two man seat suitable for Triumph Speed Twin 1200 models in the classic cross stitching design.
The seat is cut narrower than the original seat and thus provides a slimmer line in the rear area of your Triumph Speed Twin.The Crafton bench seats are made from very high quality faux leather. The faux leather offers almost nothing but advantages over genuine leather. On the one hand, it looks almost exactly like real leather, and on the other hand, imitation leather is much easier to care for.To provide a high level of seating comfort, extra high-density foam is used as padding.At the bottom of the seat base plate is each left & right a very practical tab to attach luggage (see photo).
The seat can be easily plug & play within a few seconds against the original seat exchanged.
The scope of delivery also includes a rain cover for the seat.
Dimensions: Length: 64cmWidth: 24cmHeight: 9cm
Crafton Atelier - the manufacturer
Crafton is a young and dynamic company that has set its focus on producing perfect seats for our beloved Modern Classic Triumphs. Crafton uses only very high-quality materials for both the seat covers and the seat cushions. The result is beautifully shaped benches that have an elegant surface and offer an extremely high level of seating comfort.
Greaser seat - Speed Twin 1200
CB12410.4M / 0
From
€449.00*
A very nice & slim two man seat suitable for Triumph Speed Twin 1200 models with classic cross stitching.
The seat is cut narrower than the original seat and thus provides a slimmer line in the rear area of your Triumph Speed Twin.
The Crafton seat benches are made of very high quality imitation leather. The faux leather offers almost nothing but advantages over genuine leather. On the one hand, it looks almost exactly like real leather, and on the other hand, imitation leather is much easier to care for.To provide a high level of seating comfort, extra high density foam is used as padding.The seat is available in black, brown or black Velverte. In the Velverte version, a rough imitation leather is processed in the seat area, which looks very similar to Alcantara.
The seat can be easily plug & play within a few seconds against the original seat exchanged.
The scope of delivery also includes a rain cover for the seat.
Dimensions: Length: 64cmWidth: 24cmHeight: 9cm
Crafton Atelier - the manufacturer
Crafton is a young and dynamic company that has set its focus on producing perfect seats for our beloved Modern Classic Triumphs. Crafton uses only very high-quality materials for both the seat covers and the seat cushions. The result is beautifully shaped benches that have an elegant surface and offer an extremely high level of seating comfort.
Cobra Seat - Ripped
CB12365 / 3
€359.95*
Design:
Ripped
A very nice and high quality leatherette seat, suitable for all Bobber models in ribbed design.The Cobra seat is made from a stiff, 4mm thick steel plate and is then saddled with high quality padding to provide the highest possible comfort. The seat is then covered with high quality synthetic leather.
The seat is significantly flatter than the original. This fits so much more coherent with the line of the Bobber.
Cobra Seat - Diamond
CB12371 / 3
€359.95*
A very nice and high quality leatherette seat, suitable for all bobber models in Diamond design with stepped edges.The Cobra seat is made from a stiff, 4mm thick steel plate and is then saddled with high quality padding to provide the highest possible comfort. The seat is then covered with high quality synthetic leather.
The seat is significantly flatter than the original. This fits so much more coherent with the line of the Bobber.
Cobra Seat - Full Diamond
CB12372 / 3
€359.95*
A very nice and high quality leatherette seat, suitable for all bobber models in Diamond design.
The Cobra seat is made from a stiff, 4mm thick steel plate and is then saddled with high quality padding to provide the highest possible comfort. The seat is then covered with high quality synthetic leather.
The seat is significantly flatter than the original. This fits so much more coherent with the line of the Bobber.
Seat cover leather - Scrambler 1200
CB12341 / 10
€209.95*
A very high quality genuine leather seat cover in black / brown for the original seat of the Triumph Scrambler 1200 models.Made in Italy by the company Unit Garage.
Very high quality leather is used for the cover as well as thread for the seams.
For installation, the original padding must be detached from the seat (the Takcer on the bottom of the seat must be removed, then you can easily remove the original cover).The new cover must then be properly aligned and secured with a staple gun. If you don't dare to do this, we recommend that you visit a saddler.
The scope of delivery includes only the seat cover, not the entire seat.
Passenger grab rail LOW
CB12239.1M / 0
From
€114.95*
This stainless steel bracket is designed as low as possible to visually also still make as good a line as possible.
The bracket also fits on the conversions that have a short Raisch Short Rear Fender installed.
Fits with all our accessory seats (except the Bonneville Comfort).Also does not fit with the original seat of the Bonneville / Street Cup.
Tamarit Bobber Seat
CB12167.1 / 0
€535.00*
Triumph Colors:
Jet Black
|
Leather Colour:
Black
The Tamarit Bobber Seat is a very special and particular seat. It gives every Bobber a very different look!
The Bobber Seat is absolutely not Bobber typical, but cool! An absolute eye-catcher.
The very short and narrow seat and the very narrow hump give the Bobber a sporty look. Due to the very narrow tail, the rear tire looks much wider.The rear looks especially good in combination with a short fender or simply no rear fender at all. (Matching kits can be found in the accessories section of this description).
Like all Tamarit parts, the Bobber Seat is handcrafted from the best materials available. The Bobber Seat is made of fiberglass, polyurethane and nautical fabric. All these materials are weather resistant.So cushion is a high quality foam for the most comfortable seat possible. Whereby it is fair to say that the emphasis is on as high as possible. Because as narrow as the seat is, you can not speak here of particularly comfortable. The rear is clearly something for people who use their machine for short trips and not for long day trips.The leather is one of the highest quality leatherette available. Visually, there is almost no difference to real leather. However, imitation leather has the advantage that it is easier to care for and does not get wet in the rain.The cover is available in black or brown.
In the scope of supply all necessary assembly materials are present, in order to install the tail on a Bobber.
The Bobber Seat can be ordered in unpainted (Raw) or all original Triumph colors.We usually have the most popular colors in stock. If a version is not in stock, the delivery takes about 3-4 weeks.
Variants from €420.00*
Mugello Seat Speed Twin
CB12159M / 0
From
€389.00*
The Tamarit Mugello Seat for Triumph Speed Twin 1200 is a really nice narrow & short seat that gives the rear of each Triumph SpeedTwin 1200 a really crisp shape.
Through the shape of the seat, the beautiful rear frame as well as round arch is highlighted again more, because the seat runs exactly over the frame and this also leaves visible.The quilting pattern on the bench looks particularly nice and is not one of the two classic patterns (cross ribs or diamonds) as you know it from almost all benches, but a mixture of both. A real eye catcher.Also looks particularly cool in combination with our HeckWeck kits, so you get a really cool short and clean tail (see accessories article in this description).
In addition, the seat has a particularly clean & beautiful transition to the tank. Through the cushion, which rises at the front of the tank, you also get a bit more seating comfort. When braking hard, you no longer slide against the hard tank but in the cushion.
The assembly of the seat is very simple. Simply make the original off and the new on it. The Alpin seat is attached and locked just like the original with the key lock.
For all Tamarit bench seats, a very high quality seat cushion foam is chosen to ensure the highest possible seating comfort.The bench is handmade in Spain.
The materials chosen for the base is a high quality fiberglass. The cover is one of the finest imitation leather you can get (are from shipbuilding). These look and feel almost like real leather. But have the advantage that they are absolutely easy to clean and you also have no problems with a wet bench, in the rain.
Dimensions: 73x25x12
Silverstone Seat
CB12162M / 0
From
€379.00*
The Silverstone Seat for Triumph Bonneville T100 - T120 and Stree Twin - Cup - Scrambler is a really nice narrow & short seat.This makes the rear look much more delicate. By the very strongly beveled edges of the seat, the bike gets a much narrower look.
Due to the shape of the seat, which is narrower than the original, the frame tubes are exposed / made visible.Looks especially cool in combination with our HeckWeck kit (you can find the kit under the accessories in this description).
In addition, the seat has a particularly clean & beautiful transition to the tank. Due to the padding that rises at the front of the tank, you also get a bit more seating comfort. When braking hard, you no longer slide against the hard tank but in the cushion.
The assembly of the seat is quite simple. Simply make the original off and the new on it. The Silverstone seat is attached and locked just like the original with the key lock.
For all Tamarit bench seats, a very high quality seat cushion foam is chosen to ensure the highest possible seating comfort.The bench is handmade in Spain.
The materials chosen for the base is a high quality fiberglass. The cover is one of the finest imitation leather you can get (are from shipbuilding). These look and feel almost like real leather. But have the advantage that they are absolutely easy to clean and you also have no problems with a wet bench, in the rain.
Dimensions: 73x25x12 cm
Note to Bonneville: The seat does not fit in conjunction with the original passenger grab rail.
Alpin Seat Scrambler 1200
CB12155.1 / 0
€389.00*
Leather Colour:
Brown
The Tamarit Alpine Seat for Triumph Scrambler 1200 is a really nice narrow & short seat that gives the rear of the Scrambler a really crisp shape.
Through the shape of the seat, the beautiful rear frame as well as round arch is highlighted again more, because the seat runs exactly over the frame and leaves it visible.The quilting pattern on the bench looks particularly nice and is not one of the two classic patterns (cross ribs or diamonds) as you know it from pretty much all benches.
The assembly of the bench is quite simple. Simply make the original off and the new on it. The Alpin seat is attached exactly like the original with the key lock and locked.
For all Tamarit bench seats, a very high quality seat cushion foam is chosen to ensure the highest possible seating comfort.The bench is handmade in Spain.
The materials chosen for the base is a high quality fiberglass. The cover is one of the finest imitation leather you can get (are from shipbuilding). These look and feel almost like real leather. But have the advantage that they are absolutely easy to clean and you also have no problems with a wet bench, in the rain.
Dimensions: 73x25x12
Monza Seat Thruxton 1200
CB12163M / 0
From
€389.00*
The Tamarit Monza Seat for Triumph Thruxton 1200 - R - RS - TFC is a really nice narrow & short seat that gives the rear of each Triumph SpeedTwin 1200 a really crisp shape.
Through the shape of the seat, the beautiful rear frame as well as round arch is highlighted again more, because the seat runs exactly over the frame and this also leaves visible.Also looks particularly cool in combination with our HeckWeck kits, so you get a really cool short and clean tail (see accessories article in this description).
In addition, the seat has a particularly clean & beautiful transition to the tank. Through the padding that rises at the front of the tank, you also get a bit more seating comfort. When braking hard, you no longer slide against the hard tank but in the cushion.
The assembly of the seat is quite simple. Simply make the original off and the new on it. The Mugello seat is attached and locked just like the original with the key lock.
For all Tamarit bench seats, a very high quality seat cushion foam is chosen to ensure the highest possible seating comfort.The bench is handmade in Spain.
The materials chosen for the base is a high quality fiberglass. The cover is one of the finest imitation leather you can get (are from shipbuilding). These look and feel almost like real leather. But have the advantage that they are absolutely easy to clean and you also have no problems with a wet bench, in the rain.
Dimensions: 73x25x12 cm
ATTENTION: for mounting it is mandatory to cut off the two holding tabs left & right on the frame (see pictures). Otherwise it is not possible to install such a beautiful slim seat. Even without the tabs can you original seat again be installed easily & safely. Since nothing wobbles or slips. We have already thousands of kilometers so on our own Thruxton. The security over the closure + front on the tank connection is more than enough.
Bizarra Frame Loop Kit
CB12160.1 / 0
€700.00*
Colour:
Black
|
Leather Colour:
Brown
The Bizarra Kit is a kit that includes everything you need to get a rear arch on your bike. It is "quasi" a plug & play kit that, however, requires some adjustment work and accurate work. Normally you only get a round arch for such a conversion and all other parts like seat & fenders are custom made.In this kit are all the parts you need to make the conversion to a frame loop on a water cooled Triumph Bonneville T100/T120 StreetTwin - Cup - Scrambler and get a look like on the converted bikes that can be seen in the pictures.However, the conversion is not an easy one and should be done by a specialist workshop or a talented screwdriver. The original rear frame has to be cut off.
Of course the kit gives your Triumph a whole new look! With the shorter tail and especially the visible frame Rundboge, the rear area looks much tidier and higher quality.
Included in the kit is:
Frame LoopSeat (optionally covered in black or brown)Fiberglass fenderBates style tail light (walewise in black or chrome)License plate holder including license plate light and reflector If you don't want to have a fender with the conversion, it is not mandatory to mount it. Then you have to build yourself a rear subplate, which is installed in the rear. So the rear is then protected from splashing water. In addition, the rear then also looks neat from below.
Monaco Seat
CB12124.9M / 1
From
€540.00*
Monaco Seat from Tamarit Motorcycles fits all Thruxton 1200 models. The seat gives the Thruxton the look of a real, classic cafe racer. Photos say more than words here I would say.Looks especially good in conjunction with our HeckWeck kits.
The bench is simply plug&play against the original seat and also easily attached via the locking mechanism.
As with all Tamarit parts, the Monaco Seat is handcrafted from the finest materials available. The Jerez Seat is made of fiberglass, polyurethane and nautical fabric. All these materials are weather resistant.So upholstery is a high quality foam for the most comfortable seat possible, despite the thin cushion.The leather is one of the highest quality leatherette available. Visually, there is virtually no difference to real leather. However, imitation leather has the advantage that it is easier to care for and does not get wet in the rain.The cover is available in black or brown.
Dimensions of the seat: 65x29x19
The Monaco Seat can be ordered in unpainted (Raw) or all original Triumph colors.We usually have the most popular colors in stock. If a version is not in stock, the delivery will take about 3-6 weeks.
Please note, this part is a handmade fiberglass part. Such parts can never be 100% true to size and equal. In the case of the seat, this can manifest itself in such a way that the tip of the hump does not always sit 100% Middig to the frame.
Suzuka Seat
CB12144.5M / 1
From
€570.00*
Suzuka Seat from Tamarit Motorcycles suitable for SpeedTwin 1200.The seat gives the Speed Twin the look of a real, classic cafe racer. Photos say more than words here I would say.Looks especially good in combination with our various rear kits for the SpeedTwin (see accessory articles in this description).
The bench simply plug&play against the original seat and is also easily attached via the locking mechanism.
As with all Tamarit parts, the Suzuka Seat is handcrafted from the finest materials available. The Jerez Seat is made of fiberglass, polyurethane and nautical fabric. All these materials are weather resistant.So upholstery is a high quality foam for the most comfortable seat possible, despite the thin cushion.The leather is one of the highest quality leatherette available. Visually, there is virtually no difference to real leather. However, imitation leather has the advantage that it is easier to care for and does not get wet in the rain.The cover is available in black or brown.
Dimensions of the seat: 65x29x19 cm
The Suzukua Seat can be ordered in unpainted (Raw) or all original Triumph colors.We usually have the most popular colors in stock. If a version is not in stock, the delivery will take about 3-6 weeks.
Please note, this part is a handmade fiberglass part. Such parts can never be 100% true to size and equal. In the case of the seat, this can manifest itself in such a way that the tip of the hump does not always sit 100% MIttig to the frame.
Jerez Seat
CB12121 / 2
€495.00*
Triumph Colors:
Raw
|
Leather Colour:
Brown
The Jerez Seat from Tamarit makes your Bonneville / StreetTwin Cup Scrambler a real CafeRacer.
The bench is simply plug & play replaced against the original seat and also easily attached via the locking mechanism.
Like all Tamarit parts, the Jerez Seat is handcrafted from the finest materials available. The Jerez Seat is made of fiberglass, polyurethane and nautical fabric. All these materials are weather resistant.So upholstery is a high quality foam for the most comfortable seat possible, despite the thin cushion.The leather is one of the highest quality leatherette available. Visually, there is virtually no difference to real leather. However, imitation leather has the advantage that it is easier to care for and does not get wet in the rain.
Dimensions of the seat: 70x28x19
The Jerez Seat can be ordered in unpainted (Raw) or all original Triumph colors.We usually have the most popular colors in stock. If a version is not in stock, the delivery will take about 3-4 weeks.
Note to Bonneville: The seat does not fit in conjunction with the original passenger grab rail.
Austin Seat
CB12218 / 1
€590.00*
Triumph Colors:
Raw
|
Leather Colour:
Black
Austin Seat from Tamarit Motorcycles suitable for all Triumph Scrambler 1200.The Austin Seat gives the machine a really radical Scrambler - Flat Track look.
The seat is simply plug & play replaced with the original seat and also easily attached via the locking mechanism.
As with all Tamarit parts, the Austin Seat is handcrafted from the finest materials available. The Austin Seat is made of fiberglass, polyurethane and nautical fabric. All of these materials are weather resistant.So cushion is a high quality foam for the most comfortable seat possible, despite the thin cushion.The leather is one of the highest quality leatherette available. Visually, there is virtually no difference to real leather. However, imitation leather has the advantage that it is easier to care for and does not get wet in the rain.The cover is available in black or brown.
The Austin Seat can be ordered in raw or all original Triumph colors.We usually have the most popular colors in stock. If a version is not in stock, the delivery will take about 3-6 weeks.
The Viper Seat
CB12087M / 0
From
€349.95*
Motone Slim seat.
The Viper seat is really nice and narrow and flat. The bench is designed so narrow that you get a slight view of the frame tubes. This gives the bike a slimmer line.Nevertheless, there is a high level of seating comfort thanks to high-quality polyurethane foam as the seat cushion.
The upholstery is very high-quality imitation leather, which comes very close to the look of real leather.
The Blackadder Seat
CB12373M / 0
From
€334.95*
Motone Slim seat .
The Blackadder seat is really nice and narrow and flat. The bench is designed so narrow that you get a slight view of the frame tubes. This gives the bike a slimmer line.Nevertheless, there is a high level of seating comfort thanks to high-quality polyurethane foam as the seat cushion.
The upholstery is very high-quality imitation leather, which comes very close to the look of real leather.
Solitude Seat
CB12078M / 5
From
€650.00*
Solitude Seat for Triumph SpeedTwin by Rennstall Moto.
This seat is not just a seat, it changes the look of the rear immensely and gives your machine a completely different look! The seat can be replaced plug & play against the original. Through a CNC machined tank connection, spacers & as well as an aluminum base plate is its stable holder as well as a very good fit guaranteed.
The tail also fits with the original Speedtwin fender. We recommend for a cool look but our HeckWeck kit additionally to install. If you want to keep the original aluminum fender, we recommend to order our short license plate holder. Both items can be found in the accessories section of this description.
The rear is available in Raw (unpainted) or the three original Speed Twin colors (Korosi Red, Silver Ice & Jet Black). You can also order it with a seat base plate only, to cover yourself or ready covered with a very high quality leatherette.The painted parts usually have a delivery time of about 3-6 weeks.
All parts are made in Germany, are TÜV tested and come with parts certificate.Assembly instructions & everything else needed for assembly is included.
Perfectly matching the rear there are other body parts from the Solitude series (see accessories in this description).
SW-Motech Comfort Seat Cushion
CB11977M / 5
From
€89.99*
The optimal companion for comfortable sitting!Who does not know it on long tours? At some point, the backside simply hurts. With this seat cushion, which consists of many individual air chambers, the problem is solved. The cushion can be inflated to different degrees of hardness depending on your needs.It is also perfectly suited for bikes that have extremely narrow and not very comfortable benches for optical reasons.Enjoy long tours to the finish: the TRAVELLER comfort cushion with an air cushion made of durable polyurethane relieves the back and buttocks. The comfortable, vibration-absorbing bench seat supports good circulation and prevents painful pressure points. In addition, the air honeycombs and the breathable spacer fabric reduce heat and perspiration.A non-slip underside and the circumferential retaining straps guarantee the safe positioning of the seat cushion. The bi-elastic, robust imitation leather surface provides special seating comfort. An integrated valve allows the air volume to be varied for greater comfort or a more intensive ride feeling on winding mountain tours.
Relief for back and buttocks
Prevents numbness and painful pressure points
Reduces heat and perspiration due to the breathable spacer fabric of the cover and inner padding with interconnected air honeycombs
Especially high vibration damping
Integrated valve allows variable air filling
Two sturdy straps with ROK straps and anti-slip underside for precise positioning
Theft protection by fixing under the seat
Surface made of robust, bi-elastic artificial leather for special seating comfort
Waterproof interior: Air cushion made of polyurethane
dimensions:
Small: 22,0 x 30,0 cm
Medium: 30,5 x 30,0 cm
Large: 33,5 x 38,0 cm
Rattel Cafe Racer Seat
CB11972M / 600
€329.95*
Cafe Racer seat for all Street Twin and Bonneville LC models.The seat is nice and flat and gives the Street Twin models a nice flat and sporty line.High quality imitation leather, which looks very similar to real leather.Can easily be exchanged with the original seat (except for the Street Scrambler, where the seat has to be moved backwards, but there are only 2 screws).
Low Seat Scrambler 1200
CB11824M / 600
From
€309.00*
Since the Scrambler 1200 is a bit too high for some riders, Triumph offers a lower version of its original bench seat in its original accessories. This seat is 25mm lower than the original (otherwise it is identical to the original).
Available in black or brown.
Triumph Diamond Seat Speed Twin
CB11813M / 30
From
€345.00*
Triumph original accessory seat for the Speed Twin.
The seat has the same shape as the original, but is covered with a beautiful leather (optionally in brown or black). In addition, the diamond pattern gives the seat a really chic look.
Thruxton 1200 Slim Sitzplatte
CB11748 / 0
€259.95*
Die Thruxton 1200 hat einen wunderschönen Heckrahmen mit Rundbogen, nur man sieht nichts davon! Eine absolute Schande. Also haben wir es uns zur Aufgabe gemacht eine schlanke und kurze Sitzbank zu bauen, die den Heckrahmen der Thruxton komplett frei legt. Das Ergebnis ist eine schmalere Linie und ein Heck, das seines gleichen sucht (besonders in Verbindung mit dem HeckWeck Kit, siehe Zubehörartikel in dieser Beschreibung). Bilder sagen hier mehr als Worte.Da nicht jeder den gleichen Geschmack in Sachen Leder, Bezug, Form etc hat verkaufen wir die Sitzgrundplatte auch einzeln. Mit der Sitzplatte kann man dann einfach zu dem Sattler seines Vertrauens gehen und sich was schönes machen lassen.Die Fotos sind dann nur Bespiele was möglich wäre.
Die Sitzgrundplatte ist aus extrem hochwertigem und steifem Kunststoff gefertigt. Dadurch kann die Platte sehr dünn gehalten werden, wodurch die Sitzbank schön flach ist, nicht unnötig schwer wird und trotzdem völlig stabil ist.
Aufgrund der sehr schmalen Sitzgrundplatte, müssen die originalen Halteösen in der Mitte des Rahmens abgeschnitten werden (siehe die letzten Produktfotos). Auch ohne diese Ösen kann die originale Sitzbank weiter ganz normal, ohne wackeln oder sonstiges montiert werden. Wir empfehlen den Rahmen an der Schnittstelle mit einem schwarzen Lack nach zu tupfen, um Rost vorzubeugen.
Thruxton 1200 Cafe Racer Slim Seat
CB11730M / -1
€629.95*
Exclusive Classicbike-Raisch Slim Seat, with leather hump in Cafe Racer style, for the Triumph Thruxton 1200 & Thruxton R.The Thruxton 1200 has a beautiful rear frame with round arch, but you can't see it! An absolute disgrace. So we made it our business to build a slender and short bench that completely exposes the rear frame of the Thruxton. The result is a narrower line and a rear that looks for its equal (especially in connection with the HeckWeck Kit, see accessories in this description). Pictures say more than words here.
The benches are produced in small series and completely handcrafted here in Germany. We have deliberately chosen a very high quality artificial leather (with grain looks like real leather!) for the bench, as it is more durable & easier to clean. In addition, artificial leather bleaches hardly to not at all and retains its dark black. The upholstery is made of various high-quality foam materials (sandwich construction) to provide the highest possible seating comfort.The seat base plate is made of extremely high-quality and stiff plastic. Thus the plate can be kept very thin, whereby the seat is beautifully flat, does not become unnecessarily heavy and is nevertheless completely stable.
Due to the very narrow seat base plate, the original retaining eyes in the middle of the frame have to be cut off (see the last product photos). Even without these eyelets, the original seat can still be mounted normally, without shaking or anything else. We recommend to dab the frame at the interface with a black varnish to prevent rust.
Thruxton 1200 King & Queen Slim Seat
CB11731M / -1
€629.95*
Exclusive Classicbike-Raisch Slim Seat, as King & Queen version for 2 man operation, for the Triumph Thruxton 1200 & Thruxton R.The Thruxton 1200 has a beautiful rear frame with round arch, but you can't see anything of it! An absolute disgrace. So we made it our business to build a slender and short bench that completely exposes the rear frame of the Thruxton. The result is a narrower line and a rear that looks for its equal (especially in connection with the HeckWeck Kit, see accessories in this description). The Thruxton is also delivered with a 1 man bench seat. Who would like to drive a round in twos needs a second seat.Pictures say more than words here.
The benches are manufactured in small series and completely in manual labour here in Germany. We have deliberately chosen a very high quality artificial leather (with grain looks like real leather!) for the bench, as this is more durable & easier to clean. In addition, artificial leather bleaches hardly to not at all and retains its dark black. The upholstery is made of various high-quality foam materials (sandwich construction) to provide the highest possible seating comfort.The seat base plate is made of extremely high-quality and stiff plastic. Thus the plate can be kept very thin, whereby the seat is beautifully flat, does not become unnecessarily heavy and is nevertheless completely stable.
Due to the very narrow seat base plate, the original retaining eyes in the middle of the frame have to be cut off (see the last product photos). Even without these eyelets, the original seat can still be mounted normally, without shaking or anything else. We recommend to dab the frame at the interface with a black varnish to prevent rust.
Thruxton 1200 Slim Seat Vintage Tan Ltd.
CB11732 / -1
€659.95*
Exclusive Classicbike-Raisch Slim Seat, with leather hump in Cafe Racer style, for the Triumph Thruxton 1200 & Thruxton R.Covered with brown, finest genuine leather. The leather has a beautiful grain that looks a little used from the start. At the moment the leather gets an incredibly beautiful patina! If the leather is not dark enough for you (there is a darker tucken in live than in the photos), you can simply put dark leather grease on the leather.The seat is only sold in a limited quantity with this leather (while stocks last).
The Thruxton 1200 has a beautiful rear frame with a round arch, but you can't see it! An absolute disgrace. So we made it our business to build a slender and short bench that completely exposes the rear frame of the Thruxton. The result is a narrower line and a rear that looks for its equal (especially in connection with the HeckWeck Kit, see accessories in this description). Pictures say more than words here.
The benches are produced in small series and completely handcrafted here in Germany. The upholstery is made of various high-quality foam materials (sandwich construction) to provide the highest possible seating comfort.The seat base plate is made of extremely high-quality and stiff plastic. Thus the plate can be kept very thin, whereby the seat is beautifully flat, does not become unnecessarily heavy and is nevertheless completely stable.
To see the shape of the seat on the motorcycle, there are also pictures with a black seat in the photos.
Due to the very narrow seat base plate, the original retaining eyes in the middle of the frame have to be cut off (see the last product photos). Even without these eyelets, the original seat can still be mounted normally, without shaking or anything else. We recommend to dab the frame at the interface with a black varnish to prevent rust.
Thruxton 1200 King & Queen Seat Vintage
CB12234M / -1
€659.95*
Exclusive Classicbike-Raisch Slim Seat, as King & Queen version for 2 man operation, for the Triumph Thruxton 1200 & Thruxton R.Covered with brown, finest genuine leather. The leather has a beautiful grain that looks a little used from the start. With currently the leather gets an incredibly beautiful patina! To whom the leather is not dark enough (is in live still a tucken darker than in the photos), which can simply go with dark leather grease over the leather.The seat is sold only in a limited number of pieces, with this leather (while stocks last).
The Thruxton 1200 has a beautiful rear frame with round arch, only you see nothing of it! An absolute shame. So we took it upon ourselves to build a slim and short seat that completely exposes the Thruxton's rear frame. The result is a narrower line and a rear end that is second to none (especially when combined with the HeckWeck kit, see accessory article in this description). In addition, the Thruxton comes from the factory with a 1 man seat. If you like to ride a round with two people, you need a second seat.Pictures say more than words here.
The seats are made in small series and completely handmade here in Germany. The upholstery is made of different high-quality foams, (sandwich construction) to provide the highest possible seating comfort.The seat base plate is made of extremely high quality and rigid plastic. This allows the plate to be kept very thin, making the seat nice and flat, not unnecessarily heavy and yet completely stable.
Due to the very narrow seat base plate, the original retaining eyelets in the middle of the frame must be cut off (see the last product photos). Even without these eyelets, the original seat can continue to be mounted normally, without wobbling or otherwise. We recommend dabbing the frame at the interface with a black varnish to prevent rust.
Seat Cowl Thruxton 1200
CB11676.1M / 600
From
€279.00*
Original Triumph cusp cap for the original SItzbank.Simply mounted within 2-3 minutes.Delivery time on request, as we do not have all colors in stock.
Seat driver & Sozia brown diamond Speedmaster
CB11548M / 600
From
€169.00*
Stylish quilted leather seat cushions in a diamond pattern for the Speedmaster in dark brown. Triumph uses high-quality materials and a good seat cushion! The matching seat cushion for the co-driver is of course also available.
Seat driver & sozia comfort Speedmaster
CB11549M / 600
From
€179.00*
Comfortable seat cushion for the Speedmaster. Triumph uses high-quality materials and a very comfortable seat cushion as well as a lumbar support to improve comfort on the Speedmaster during long tours! The matching seat cushion for the co-driver is of course also available.
Sitzpolster Bobber Rauten
CB11550M / 5
From
€199.00*
Original Triumph seat cushion with diamond quilting for the Triumph Bobber. Available in brown or black. The seat cushions are covered with high-quality artificial leather (hence the more than fair price).
Statement seat Bobber
CB11552M / 5
From
€459.00*
Original Triumph Statement seat for the Triumph Bobber. Available in brown or black. This is a worthy seat for the Bobber models! made of thick, high-quality genuine leather. Has a bit of the look of an old, really high-quality horse saddle. Fits simply only perfectly on the motorcycle!Replacing the seat is quite simple and quick.
Cafe Racer Seat LC
CB11427M / 4
From
€425.00*
Cafe Racer Hump Seat bench for Bonneville & Street models.
The seat does not only impress with its hump, which makes your motorcycle look sportier and makes a real Cafe Racer out of it, but it is also much narrower than the original seat. It is so narrow that even the frame tubes are visible (as with the Cool Seats).
Real leather seat in a rustic look, because the leather has a really nice grain.
Due to the very high quality upholstery, the seat is despite its narrow design very long-distance suitable (we have tested ourselves). In addition, she does not suck water, even if the bike is a few days in the rain (we have already several times even met at meetings).
The benches are very well made and especially the real leather in a vintage look makes something good! A real eye-catcher.
The black is a black with a light anthracite stitch, which is simply because it's really leather (if you want it to be really black, you just grease it with black leather grease).
Classicbike-Raisch Tip: We also offer leather tank pads, made from the same leather, to match the seats. In combination this looks very elegant. The tank pad you will find under the accessories articles in this description.
Cool Seat LC ribbed.
CB11209M / -1
From
€415.00*
Finally, there is the Coolseat of the AC models also for the new water cooled. Really nice and short. Gives the motorcycle a completely different line, as it has a much slimmer effect and the frame ridges become visible.
The seat looks not only wonderful, but is also comfortable!
Real leather seat in rustic look with quilted rib pattern.
The seat benches are very very well processed (handmade) and above all the genuine leather in vintage look is what makes it! A real eyecatcher.
The black is a black with light antracite stitch which is simply because it is genuine leather (if you want to have it really black, you have to grease it with black leather cream).
Classicbike-Raisch Tip: We also offer leather tank pads, made from the same leather, to match the seats. In combination this looks very elegant. The tank pad you will find under the accessories articles in this description.
Cool Seat LC diamond
CB11210M / -1
From
€435.00*
Finally, there is the Coolseat of the AC models also for the new water cooled. Really nice and short. Gives the motorcycle a completely different line, as it has a much slimmer effect and the frame ridges become visible.
The seat looks not only wonderful, but is also comfortable!
Real leather seat in rustic look with quilted diamond pattern.
The seat benches are very very well processed (handmade) and above all the genuine leather in vintage look is what makes it! A real eyecatcher.
The black is a black with light antracite stitch which is simply because it is genuine leather (if you want to have it really black, you have to grease it with black leather fat).
Classicbike-Raisch Tip: We also offer leather tank pads, made from the same leather, to match the seats. In combination this looks very elegant. The tank pad you will find under the accessories items in this description.
Vintage Slim Seat LC
CB11674M / 3
From
€425.00*
Genuine leather seat in vintage style in extra narrow so that the frame tubes are visible.The seat benches are very well finished, and especially the genuine leather in vintage look is really something! A real eye-catcher.Due to the very high-quality upholstery, the bench is very long-distance-suitable despite its narrow design (we tested it ourselves). Furthermore, it doesn't suck water, even if the bike is standing in the rain for a few days (we've tested it on several meetings ourselves).The small integrated bag not only looks really cool, it is also very practical! Put your mobile phone & wallet in before the trip and you don't have to constantly grab the bags to check that nothing slips out.The anthracite is a colour that goes slightly in the direction of black (a very dark anthracite). If you like it black, you can rub a little black leather grease on the seat and it's black.
Classicbike-Raisch Tip: We also offer leather tank pads, made from the same leather, to match the seats. In combination this looks very elegant. The tank pad you will find under the accessories articles in this description.
Comfort Single Stool Thruxton 1200
CB10860 / 600
€319.00*
Colour:
Black
Comfort Single Seat Bench Thruxton rider bench with integrated 3D mesh panels for optimum weight distribution and increased comfort. With quilted details and embroidered Triumph logo. The seat is of comfort as the signals only with a higher quality upholstery for more comfort on long journeys. The shape is the same as the original seat.
Comfort Double seat bench Thruxton 1200
CB10861 / 600
€389.00*
Colour:
Black
Triumph comfort double seat in black including passenger grab rail suitable for all Thruxton 1200 models.
With integrated 3D mesh insert provides optimum weight distribution. The comfort double seat improves the riding experience through increased comfort. Finished with two high quality fabrics as well as quilted details and embroidered Triumph logo.The grab rail included in the LIeferumfang can be mounted optionally, but it does not have to.
Very comfortable seat for those who like to take a passenger with them on their Thruxton. For the driver has been specially used a non-slip rough leather, which also looks good.
Bonnie Comfort Seat
CB10875M / 600
From
€359.00*
Comfort seat black or brown Bonnie - Thanks to the 3D mesh fabric inserts from Triumph, the comfort seat offers drivers and passengers maximum comfort. With rib stitching and embroidered Triumph lettering.
Fits from the Street Twin models only if the fender is removed (e.g. with our rear wake-up kit).