Cool Seat LC ribbed.

Product information "Cool Seat LC ribbed."

Finally, there is the Coolseat of the AC models also for the new water cooled. Really nice and short. Gives the motorcycle a completely different line, as it has a much slimmer effect and the frame ridges become visible.

The seat looks not only wonderful, but is also comfortable!

Real leather seat in rustic look with quilted rib pattern.

The seat benches are very very well processed (handmade) and above all the genuine leather in vintage look is what makes it! A real eyecatcher.

The black is a black with light antracite stitch which is simply because it is genuine leather (if you want to have it really black, you have to grease it with black leather cream).

Classicbike-Raisch Tip:
We also offer leather tank pads, made from the same leather, to match the seats. In combination this looks very elegant.
The tank pad you will find under the accessories articles in this description.

Triumph LC models from 2016:
  • Bonneville T100
  • Bonneville T120
  • Street Cup
  • Street Scrambler
  • Street Twin
Triumph LC ab 2016
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
-1
-1
-1
-1

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

HeckWeck Kit - Bonneville CB11198.1M / RS-1
Classicbike-Raisch Heck-Weck Kit for Triumph Bonneville T100 / T120.Made in Germany A rear must look this clean and tidy if you don't want a rear mudguard on your bike. Turn signal holders: These must be ordered separately. You will find two different blinker holders below the description. Vario blinker holder: The turn signals are attached directly to the license plate with the Vario turn signal holders (the turn signal holders can be adjusted in width so that each turn signal sits in the perfect position for every license plate width).This version is legal & StvO compliant. Turn signal holder strut:The indicators are mounted on the strut from the inside using a retaining plate. When the ignition is switched off, you almost think there are no indicators on the bike (but you can see them well enough when they light up). However, this is not Stvo-compliant, as the indicators are too far to the rear). ATTENTION: If you have installed a StreetTwin or other flat seat on your Bonneville (e.g. our Cool Seat, the Tamarit Silverstone Seat, a Crafton seat or the flat Triumph accessory seat), you should choose the kit for the StreetTwin. The reason for this is that the license plate holder on the Street Twin is slightly shorter, otherwise the kit is the same. The rear lower fairing (lower shell) provides good splash protection. An LED license plate light with E-number is also included. A plug is also supplied which fits into the original wiring harness. In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness.All other cables, plugs, screws etc. required for installation are of course also included.The license plate holder is small enough to accommodate any motorcycle license plate available in the world and be completely concealed. As the HeckWeck kit does NOT include a central rear light, it is essential to have 3in1 indicators (these combine indicator, rear & brake light in one blinker).Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.All indicators listed here have an E number and are road legal. Even inexperienced mechanics will have no problems with the conversion (as we include detailed fitting instructions). Resistors are not necessary as the flashing frequency can be set via the menu. If you don't feel confident enough to do the wiring for the lighting yourself or simply don't feel like it, you can order the ready-made wiring (accessory article HeckWeck Kit / LC under the 3-1 indicators).   If you want to have it 100% correct for TÜV & police, you can also order a reflector (accessory article HeckWeck Kit / LC under the 3-1 indicators). We also recommend ordering our license plate screw set in order to be able to mount the license plate nicely (accessory article HeckWeck Kit / LC under the 3-1 indicators).

From €199.00*
Leather Tankpad - Cool CB12347M / RS602
Handmade leather tankpads from Italy, for all Triumph models. The Cool Tankpads are made of the same leather as the: Cool Seats / Cafe Racer Seat / Slim Bump Seat / Vintage Slim Seat / King & Queen Seat. Seatpads you will find all under the accessories in this description.Especially in combination with a matching seat, a leather tankpad looks very elegant. The pads are available in a linear quilted and diamond quilted version, as well as in black or brown (matching the seat benches). The tank pads are attached via a 3M foil on the back.

From €99.95*
Vintage luggage bags LC CB11440.3 / RS600
Colour: Antagonist | Side: Right
Leather luggage bags with black holder in vintage style for Bonneville T100 / T120 and StreetTwin, StreetCup & StreetScrambler (for the Scram only for the left side because of the exhaust). The bag has a large inner compartment that you get enough for a tour (and a small inside pocket for small items). Who ever goes on a longer tour and left + right mounted a bag, which gets enough luggage in there. On long trips, we recommend the clothes or other things that are not allowed to get wet in bags or to make a rain cover over the bag. The bags are supplied with a holder for the motorcycle and shoulder straps to carry when you take off the bag. The leather is a beautiful genuine leather in a rustic look. It is the same leather as some of the benches we have in the program and the tank strap (see accessories). These things can therefore be installed together optimally. The Antrahzit is an antique color, which is already easy in the Richtugn black (ie a very dark Antrahzit, who wants to have it really dark, should treat the bag with black leather grease). Since the bags are made by hand and small series, they are now and then unfortunately not in stock.

€455.00*