Silverstone Seat

Tamarit

€379.00*

Prices incl. VAT plus shipping costs

Leather Colour

HeckWeck Kit - Bonneville

from €139.00*

Tamarit Leder Kniepolster LC

from €149.00*

Product number:	CB12162.2
item number:	TMRT486

Product information "Silverstone Seat"

The Silverstone Seat for Triumph Bonneville T100 - T120 and Stree Twin - Cup - Scrambler is a really nice narrow & short seat.
This makes the rear look much more delicate. By the very strongly beveled edges of the seat, the bike gets a much narrower look.

Due to the shape of the seat, which is narrower than the original, the frame tubes are exposed / made visible.
Looks especially cool in combination with our HeckWeck kit (you can find the kit under the accessories in this description).

In addition, the seat has a particularly clean & beautiful transition to the tank. Due to the padding that rises at the front of the tank, you also get a bit more seating comfort. When braking hard, you no longer slide against the hard tank but in the cushion.

The assembly of the seat is quite simple. Simply make the original off and the new on it. The Silverstone seat is attached and locked just like the original with the key lock.

For all Tamarit bench seats, a very high quality seat cushion foam is chosen to ensure the highest possible seating comfort.
The bench is handmade in Spain.

The materials chosen for the base is a high quality fiberglass. The cover is one of the finest imitation leather you can get (are from shipbuilding). These look and feel almost like real leather. But have the advantage that they are absolutely easy to clean and you also have no problems with a wet bench, in the rain.

Dimensions: 73x25x12 cm

Note to Bonneville: The seat does not fit in conjunction with the original passenger grab rail.

Triumph LC models from 2016:	Bonneville T100 Bonneville T120 Street Cup Street Scrambler Street Twin

Triumph LC ab 2016	Bobber 16" / Bobber Black EU 4 Bobber 16" / Bobber Black EU 5 Bobber 19" Bonneville T100 EU 4 Bonneville T100 EU 5 Bonneville T120 EU 4 Bonneville T120 EU 5 Scrambler 1200 XC / X EU 4 Scrambler 1200 XC / X EU 5 Scrambler 1200 XE EU 4 Scrambler 1200 XE EU 5 Speed Twin 1200 EU 4 Speed Twin 1200 EU 5 Speedmaster EU 4 Speedmaster EU 5 Street Cup Street Scrambler / Scrambler 900 EU 4 Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900 Street Twin / Speed Twin 900 EU 4 Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900 Thruxton 1200 Thruxton 1200 R Thruxton 1200 RS

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

HeckWeck Kit - Bonneville CB11198.1M / -1

Classicbike-Raisch Heck-Weck Kit for Triumph Bonneville T100 / T120.Made in Germany A rear must look this clean and tidy if you don't want a rear mudguard on your bike. Turn signal holders: These must be ordered separately. You will find two different blinker holders below the description. Vario blinker holder: The turn signals are attached directly to the license plate with the Vario turn signal holders (the turn signal holders can be adjusted in width so that each turn signal sits in the perfect position for every license plate width).This version is legal & StvO compliant. Turn signal holder strut:The indicators are mounted on the strut from the inside using a retaining plate. When the ignition is switched off, you almost think there are no indicators on the bike (but you can see them well enough when they light up). However, this is not Stvo-compliant, as the indicators are too far to the rear). ATTENTION: If you have installed a StreetTwin or other flat seat on your Bonneville (e.g. our Cool Seat, the Tamarit Silverstone Seat, a Crafton seat or the flat Triumph accessory seat), you should choose the kit for the StreetTwin. The reason for this is that the license plate holder on the Street Twin is slightly shorter, otherwise the kit is the same. The rear lower fairing (lower shell) provides good splash protection. An LED license plate light with E-number is also included. A plug is also supplied which fits into the original wiring harness. In other words, only the indicators, lights etc. need to be crimped and can then be connected without having to change anything on the wiring harness.All other cables, plugs, screws etc. required for installation are of course also included.The license plate holder is small enough to accommodate any motorcycle license plate available in the world and be completely concealed. As the HeckWeck kit does NOT include a central rear light, it is essential to have 3in1 indicators (these combine indicator, rear & brake light in one blinker).Further down in this description you can order the indicators as a set and get a 10% discount on the indicators.All indicators listed here have an E number and are road legal. Even inexperienced mechanics will have no problems with the conversion (as we include detailed fitting instructions). Resistors are not necessary as the flashing frequency can be set via the menu. If you don't feel confident enough to do the wiring for the lighting yourself or simply don't feel like it, you can order the ready-made wiring (accessory article HeckWeck Kit / LC under the 3-1 indicators). If you want to have it 100% correct for TÜV & police, you can also order a reflector (accessory article HeckWeck Kit / LC under the 3-1 indicators). We also recommend ordering our license plate screw set in order to be able to mount the license plate nicely (accessory article HeckWeck Kit / LC under the 3-1 indicators).

From €139.00* €199.00* (30.15% saved)

Details

Tamarit Leder Kniepolster LC CB12177M / 610

Handmade Tamarit tank knee pads. The pads are made of the same, very high quality and weather resistant synthetic leather as the Tamarit seats (see accessory items in this description). So if you want to have exactly the right knee pad to go with your bench, this is the part for you. The pads are without glue or similar to attach. The customer must do this himself. Is the manufacturer extra so wanted, so that everyone can decide for themselves how he wants to attach the pad.

From €149.00*

Details

Silverstone Seat

Ask a question

Previously asked questions