This lamp holder kit moves the original headlight and speedometer of the Thruxton 1200 & Street Cup models further down. Very often and for a long time we sat in front of our Thruxton and thought that this is a sharp bike! But something just does not fit. Something is not right in the front part!After some considerations, drawings and a few beers we realized that the headlight and the speedometer are just too high. The position of the headlight spoils the nice, flat & straight line of the bike. So we developed a kit to lower the headlight and the speedo 4cm. Also the headlight moves 1,5cm closer to the bike and doesn't stick out as far to the front.The kit consists of 2 CNC milled aluminium lamp holders, a milled speedo lowering and screws.The lamp holders can be exchanged Plug & Play for the original ones. The speedo lowering is simply screwed between the speedo holder and the speedo. Assembly time approx. 10 minutes. Rarely have we had a part in our assortment that brings such a positive change to the motorcycle with so little effort. Because pictures say more than thousand words, just look at the pictures! IMPORTANT! click on the pictures and have a look at them in large size, because they are moving pictures, which show the change from original to lowering. The kit is available in deep black anodized and in raw aluminium.In raw aluminium the brackets and the lowering are perfect for polishing, it fits very well to the original triple clamp which is also polished on the Thruxton R. The Motul aluminium polish from our range is perfectly suited for this purpose (see accessories in this description). Polishing takes about 10 minutes (The pictures of the kit on wood show polished holders). Accessories: we also offer a schwarezn set of screws as accessories (see accessories in this description). The kit includes all visible screws on the lamp holders, in black.

This lamp holder kit offsets the original headlight and the speedometer of your Bonneville T120 & T100. Whenever you look at a Bonneville or see photos, you think yup a really chic classic, but something just does not fit 100%. Something is not right in the front part! The headlight and the speedometer sit just too high, which does not fit perfectly in the line of the bike.So we have developed a kit, with which the headlight and the speedometer is set about 3cm lower. Also, the headlight comes 2cm closer to the motorcycle.Due to the deeper seated speedometer, this nestles much better to the triple clamp even in the top view. So it looks like he would fit perfectly to the triple clamp and no longer as if he was just somehow screwed to it (see pictures).Also, a nice side effect is that the regulator has to be moved from in front of the triple clamp behind the water cooler. If you are worried that it might get too hot there, you are wrong. Triumph installs the same regulator on other models from the factory also behind the radiator. The lamp holders have an 8 hole, for mounting turn signals. Pretty much all accessory turn signals on the market have an M8 thread and thus fit into the hole (who wants to continue to use the original turn signals, you have to drill yourself a second hole). We recommend to the kit the Motogadget Tens or Pin turn signals, which simply fit best to the holders (see accessory article in this description).If you do not want to mount turn signals on the brackets, we recommend ordering a pair of turn signal plugs (see accessory items in this description). The kit consists of: Stainless Steel Heeadlight Holders Speedo lowering Regulator relocation Rarely have we had a part in our range that brings such a positive change to the bike with so little effort. Since pictures say more than a thousand words, just look at the pictures! IMPORTANT! click on the pictures and look at them in large, because then they are moving pictures that show the change from original to lowering. The kit is available in either Black (lamp holders are black powder coated) or Raw (the stainless steel lamp holders are hand brushed). All cables are long enough for mounting the regulator routing. All cables are long enough for mounting the controller routing. However, under certain circumstances, a piece of the wiring harness must be stripped in the steering head area, so that you have more cable length available. To insulate this again neatly, we offer a high quality fabric tape with, which you can find under the accessories in this description.An assembly instruction is of course also supplied. Our Alcatraz lamp grid fits especially well to the kit (is also installed on some of the product photos). The grid can also be found under the accessories in this description.

This lamp holder kit lowers the original headlight and speedometer of the Triumph Speed Twin. Very often and for a long time we sat in front of our Speed Twin and thought it was a nice bike! But something just does not fit. Something is not right in the front part! After some considerations, drawings and a few beers we realized that the headlight and the speedometer are just too high and look like foreign objects on the bike. The position of the headlight spoils the beautiful line of the bike. So we have developed a kit, with which the headlight as well as the speedometer is set 4cm lower (for the Euro 5 models, the speedometer is set 3cm lower and the headlight 2cm lower).Furthermore the headlight moves 1,5cm closer to the bike and doesn't stand out so far to the front anymore.Also you have a nice free view on the nice handlebar clamp, because it is not covered by the speedometer anymore.The kit consists of 2 CNC milled aluminium lamp holders, a milled speedo lowering and screws. The lamp holders can be exchanged Plug & Play with the original ones. The speedo lowering is simply screwed between the speedo holder and the speedo. Assembly time approx. 10 minutes. Rarely have we had a part in our assortment that brings such a positive change to the motorcycle with so little effort. Because pictures say more than thousand words, just look at the pictures! IMPORTANT! click on the pictures and have a look at them in large size, because they are moving pictures, which show the change from original to lowering. The kit is available in deep black anodized and in raw aluminium.In raw aluminium the holders and the lowering are perfect for polishing or painting in motorcycle colour.For polishing the Motul aluminium polish from our assortment is perfectly suitable (see accessories in this description). Polishing takes about 10 minutes (The pictures of the kit on wood show polished holders). Accessories: we also offer a schwarezn set of screws as accessories (see accessories in this description). The kit includes all visible screws on the lamp holders, in black.

  With us you get everything you need to install and connect the Motogadget Chronoclassic 2 speedometer on your Triumph Modern Classic motorcycle.Model-specific descriptions and necessary accessories can be found below in the description. The Chronoclassic 2 speedometer is a further development of the German motorcycle accessory manufacturer Motogadget, into which more than 20 years of experience have flowed.Classically elegant design combined with very high-quality materials and absolute high-end workmanship.The elegant Chronoclassic 2 speedometer is probably the highest quality motorcycle speedometer available on the market. The speedometer has a completely metal housing and is manufactured entirely by Motogadget in Germany.The classic round design (80mm diameter) combined with the flat housing (20mm depth) give the speedometer the perfect overall look and allow you to integrate it perfectly into your custom bike. When switched off, a closed, black dial provides the perfect look: modern, minimalist and at the same time timelessly classic. The digital display, developed by motogadget, consists of a matrix of 512 tiny, super-bright red LEDs that shine through the dial. Perfectly readable in direct sunlight, the display contains two lines. The top line displays gear and speed, and the bottom line displays values that can be changed at the push of a button. The illuminated pointer, a perfectly illuminated backlight and the automatic brightness adjustment of the matrix LEDs ensure optimal readability even in dark environments.The 11 control lights and the LED display are invisible when switched off. Model-specific descriptions:   Triumph AC - air-cooled models up to 2015 For all models that have a speedometer with an LCD display (kilometer counter) ex-works, an additional breakout box and breakout box A are required for connection. You can find both of these boxes among the accessories in this description. If your Triumph has a factory-fitted speedometer cable, we offer the spacer (this allows you to remove the speedometer cable). See accessories in this description. Among the accessories, you will find a universal mounting bracket to mount the speedometer. If the speedometer is not recessed in a lamp, we recommend ordering the outer cup as well. Triumph LC - water-cooled models from 2016 To mount the Chronoclassic 2 speedometer on one of the water-cooled Triumph Modern Classic models, it is essential to additionally install the Additional Tacho Box LC and the Breakout Box A.You can find these under the accessory items in this description. Among the accessories, you will find a universal mounting bracket to mount the speedometer. If the speedometer is not recessed in a lamp, we recommend ordering the outer cup as well.

With the Peak Mod Speedo Box LC it is possible to connect all Motogadget speedometers to the water cooled Triumph Modern Classic models (to date the boxes are not yet available for all Euro 5 models. But some are already available. To be on the safe side, you can ask us for the availability for your bike before ordering). We have the box selbest already installed on some motorcycles and it works really well. The assembly and wiring are really well described and understandable. Assembly instructions and cable assignment diagram can also be found as a download under the downloads in this description. So you can get an idea of the effort in advance. The speedometer box we recommend to mount under the tank of the motorcycles, there is enough space and all cables are very easy to lay.The box is available as a single & dual version. Single: For all models that have only one speedometer installed from the factory. Dual: For all models that have factory installed a speedometer & tachometer.Please specify your motorcycle model + year in the comment field (on the last page in the ordering process) when ordering. For Triumph Bobber & Speedmaster we also offer a mounting plate, with which you can mount a Motogadget Tiny - Speedster - Vintage speedometer on the triple clamp (see accessory article in this description).For all other models you have to build a plate yourself.  Note on the grip heater: If the speedometer box is installed, the original grip heater no longer works (another module is required for this). We sell the box in 2 versions:1. as a bundle at a discounted price of 100€ (this price is only granted if a Motogadget speedometer instrument is also ordered from us).2. single only the box. Models  available :     VIS-T Single  Street twin 2016-2018 Street twin 2019-2020 Street twin 2021-2024 EURO-5 / Speed twin 900 2024 Street scrambler 2016-2018 Street scrambler 2019-2020 Street scrambler 2021-2024 / Scrambler 900 2024 Bobber 2016-2020 Bobber 2017-2020  Bobber 2021-2024 EURO-5   VIS-T Dual T100 2016-2020 T100 2021-2024 EURO-5 T120 2016-2020 T120 2021-2024 EURO-5  Thruxton 1200 Thruxton R EURO-4 Thruxton RS Speed Twin 1200 2019-2021 EURO-4 Speed Twin 1200 2021-2024 EURO 5 Street cup 2016-2018   *NOT SUPPORT LIST. All Speed master. Bobber TFC

Plug & Play speedometer bracket for mounting a Motogadget Tiny / Speedster / Vintage speedometer on a Triumph Bobber or Speedmaster. The scope of delivery includes all screws and sleeves that are needed for mounting. To get a clean finish and a nice look, we recommend to order the Motogadget outer cup (see accessories article in this description).

Plug & Play speedometer bracket for mounting a Motogadget Tiny / Speedster / Vintage speedometer on a Triumph Bobber or Speedmaster. The scope of delivery includes all screws and sleeves that are needed for mounting. To get a clean finish and a nice look, we recommend to order the Motogadget outer cup (see accessories article in this description).

This aluminum cover allows to get the original double instruments completely black. Recording sheet metal and rings are completely covered. Many disturb the silver and chrome on the instruments. But to paint them black is extremely costly and usually means that you damage parts.From Arton there is now the solution. These covers are completely milled from an aluminum block and anodized deep black. They are just 1mm thick, lie like a second skin on the instruments and are mounted in a short time. The covers are available in 2 versions.Version 1: The chrome speedometer rings remain visible and it is only the recording covered. Version 2: Tacho recording and speedometer rings are completely covered.   If you want to have your speedo completely in black, we recommend to order the black speedo discs (you can find them in the accessories section of this description). 

This aluminum die-cast cover allows to get the original double instruments completely black. Recording plate and rings are completely covered.Or now new in the polished real brass finish (for those who would like it more vintage, the brass can be lightly brushed). The new The Peerless is a much more affordable option compared to the Black Line covers we still carry. The main difference is that the Blackline covers are machined aluminum and the new Peerless covers are die cast aluminum. If you want to have your speedo completely black, we recommend to order the black speedo discs (you can find them in the accessories section of this description).

The black vintage discs replace the original ones of your Thruxton 1200 / R / RS / Speed Twin / Bonneville T100 / T120 & Street Cup The replacement is quite simple and quickly done 15-20 minutes approx. It will give the cockpit of your plane a completely different look (black is beautiful). All control displays etc. will of course remain the same. Please choose in the selection: Kmh or Mph version.

Die cast aluminum cover rings for the original Triumph dual speedometer instruments. The cover is simply plug & play over the original speedometer and fixed with a screw.

This mounting plate suitable for Motogadget Tiny & Speedster speedometers is plug & play on the Triumph Bonneville T100 / T120 - Street Twin / Cup / Scrambler - Speed Twin / Scrambler 900.The scope of delivery includes everything needed to mount the plate on the original handlebar clamp (including black stainless steel screws). The mounting plate is available in 2 versions:In front of the handlebars: Speedometer is mounted in front of the handlebarsBehind the handlebars: Speedometer is mounted behind the handlebars. With both versions, it is possible to leave the ignition lock in its original position. If you replace the original speedometer on your Triumph Bonneville T100 or T120 with a smaller one (e.g. one from Motogadget) you get an unsightly, unobstructed view of the ignition lock. We have developed a suitable cover for this. You can find it under the accessories in this product description.

The Chronoclassic speedo from motogadget is an analog speedometer with many digital additional functions in a classic round case. Classicbike-Raisch offers some special mounting plates and materials for motogadget instruments (you can find them all under the accessories in this description).Also, an additional box is needed to connect the tachometers on many motorcycles (also found under the accessories).Model specific descriptions can be found below the general description. Another special feature is the dark LC display on the DarkEdition. It gives the instrument an even more harmonious appearance.However, we expressly point out that the readability is reduced in direct sunlight. If you value the best possible readability, please go for the green standard display.The technically identical instrument is also available with a white dial (see motoscope classic speedo) or as an analog tachometer (see analog DZM series CLASSIC).

Motoscope mst speedster The mst speedster is a small analog speedometer in an attractive retro design. Technically the instrument is identical to the motoscope tiny. The dial is based on the streamline design of the forties and fifties. Matching to this, it is kept in a warmer white. The shape of the hand matches the dial and is made of brushed stainless steel, and the screw ring is also available here polished or black anodized. Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).Also, an additional box is needed to connect the speedometers on many motorcycles (also found under the accessories).Model specific descriptions can be found below the general description. All other features and technical data of the instrument correspond to the motoscope tiny.The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in use and is not visible when switched off. To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted. If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored. The four indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.With the supplied menu button or e.g. the light horn button on the handlebars is switched between the displays of the LED display. These LEDs can display all the things that the original speedometer also displays.The default indication on the display is the time. If required, a short press of the button will display the values for total kilometers, trip kilometers, on-board voltage, etc. All functions, such as resetting the trip odometer or similar, are easy to operate via the pushbutton. Presettings or stored values remain saved even without power supply.

Motoscope mst Vinatge. It will never be more classic. Screw ring and hands made of solid brass. The handmade, used look is slightly different on each instrument and makes it unique. "Genuine Manufacture Quality Made in Germany". Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).In addition, an additional box is needed to connect the speedometers on many motorcycles (also found under the accessories).Model specific descriptions can be found below the general description. Technically the instrument is identical to the motoscope tiny. The dial is based on the streamline design of the forties and fifties. Matching to this, it is kept in a warmer white. The shape of the hand matches the dial and is made of brushed stainless steel, and the screw ring is also available here in a polished or black anodized finish. All other features and technical data of the instrument correspond to the motoscope tiny. The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in operation and is not visible when switched off. To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted. If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored. The four indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.With the supplied menu button or e.g. the light horn button on the handlebars is switched between the displays of the LED display. These LEDs can display all the things that the original speedometer also displays.The default indication on the display is the time. If required, a short press of the button will display the values for total kilometers, trip kilometers, on-board voltage, etc. All functions, such as resetting the trip kilometers or similar, are easy to operate via the pushbutton. Presettings or stored values remain saved even without power supply. Translated with www.DeepL.com/Translator (free version)

The motoscope tiny is a very small analog speedometer in 49mm format. It measures the speed digitally and displays it precisely via a stepper motor and pointer. The installation diameter of 49 mm and the installation depth of only 24 mm open up a wide range of possibilities for installation. Sophisticated technology makes the classic look possible without compromise. The dial does without any display cut-out or LCD and has a convincing classic-style look. The perfect solution for purists and minimalists. Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessories in this description).Also, an additional box is needed to connect the speedometers on many bikes (also found under the accessories).Model specific descriptions can be found below the general description. The high quality aluminum housing is turned from solid and its surface is black anodized. The screw ring is also available black anodized or mirror polished. The case is 100% waterproof and insensitive to vibrations. The analog dial in black and white contrast is indirectly illuminated by white LEDs. Hidden behind the black part of the dial is an innovative LED display that only shines through the dial when in operation and is not visible when switched off. To achieve optimal readability in dark, sunny and twilight conditions, the luminosity of the LEDs is automatically adjusted. If the 200 km/h on the analog scale is exceeded, the speed is automatically shown on the LED display. Likewise, the maximum speed is stored. The 4 indicator lights (blue, red, 2 x green) are also integrated in the dial. These also only become visible during operation.

Motoscope mini black. It doesn't get any smaller than this. With integrated tachometer. Classicbike-Raisch offers some special mounting plates and materials for Motogadget instruments (you can find them all under the accessory items in this description).Also, an additional box is needed to connect the tachometers on many motorcycles (also found under the accessories).Model specific descriptions can be found below the general description. The motoscope mini is an extremely small, digital motorcycle instrument. The LED display, which was specially developed by us for this purpose, is unique in the instrument sector. 251 ultra-bright LEDs form an almost rimless, outstandingly readable display surface, which can be used completely for the representation of the display values. Only this innovative, elaborate technology enables a maximum display area with minimum housing dimensions at the same time. The motoscope mini fits almost any two-, three- or four-wheeler due to its very simple, elegant design and high-quality appearance. It can support the styling in an exposed position, but can also be integrated inconspicuously and 'cleanly' - everything is possible with the mini! The innovative dot matrix of 251 ultra-bright LEDs displays the engine speed by means of a scalable, horizontal luminous band and all other functions as a numerical value in an easily detectable manner. The speed can also be called up as a numerical value at the touch of a button. To achieve optimum readability in darkness, sunlight and twilight, the luminosity of the LEDs is automatically adjusted. A speed value can be entered for the limit range of the permissible speed ('red range') or as a switching flash function. If this value is exceeded, all LEDs light up pulsatingly at the same time. The highlight: the display of the motoscope mini can show the numerical values not only from left to right, but also from top to bottom. Therefore, the instrument can also be mounted upright! With the supplied menu button or e.g. the light horn button on the handlebars is switched between the displays. The standard indication on the display is the speed value. The other measured values can be fetched on the display by a short keystroke if required. Optionally, it can be set that the display automatically returns to the speed value after a short time or that a specific display is fixed. Presets or stored values remain of course stored even without power supply.For all bikes with LCD speedometer a break out box is needed: to the article As a replacement to the not so nice speedo snail we have a spacer Translated with 

The Twinton 7" headlight for Triumph Bobber & Speedmaster allows the original speedometer of the motorcycle to be fitted in the headlight with virtually plug & play. The headlight is available either as a simple H4 bulb headlight or as a modern LED headlight.Our recommendation is to invest the extra price for the LED headlight. This provides significantly better light and looks more stylish (unless you are totally into old school, in which case an H4 headlight is a must). This gives the front of the bike a very clean look, as the entire area in front of the handlebars is free. As the speedometer is not exactly small, it is very noticeable in its original position. By disappearing into the headlight housing, it is virtually no longer noticeable. The headlight housing is made from a very stable nylon polymide using the laser sintering 3D printing process. The lamp ring is chrome-plated metal.The original speedometer is simply attached to the fixed mounting points in the headlight housing. New lamp holders are also required for installation. We recommend the Twinton lamp holders specially developed for the headlight or the Next Gen holders (see accessory products in this description). Info on the H4 headlight: The scope of delivery does NOT include an H4 bulb. You can find a really good and bright bulb among the accessories in this description. The models that have an LED headlight fitted as standard require an adapter cable (see accessories). Size 7 inch. Manufactured using a selective laser sintering process. Material is a high-strength nylon polyamide 12. Chrome-plated housing ring with embossed glass insert. Diameter approx. 200 mm / depth 180 mm. Side mounting with M8 thread, distance approx. 200 mm. With E-mark, approved as main headlamp. Attention! Headlight cannot be fitted to the original mounting point.  Speedometer itself not included! Suitable lamp holders are required.

Mounting plate MSC-A Black or silver. 2 cylinders

Outside cup for the Motogadget Speedster, Vintage & Tiney.Required if the speedometer is not used in the headlight or similar.

Vintage Cup: Beautiful copper outer cup for mounting between the handlebars. The eyecatcher par excellence. Fits for Motoscope mst. Vintage. Available with mounting bracket for 22mm handlebars or 1 handlebars.

Motosign mini black control lamps

Motogadget MSM Bracket bracket c Black

Motogadget Combiframe for Motogadget Mini Tacho. The perfect holder for the mini speedometer with intriguing LED control lights (5 pieces). The retaining plate is also required for the mounting. Color: Black (other colors on request)

Stainless steel button to set the speedometer menu.This button can be used e.g. simply integrate it into the retaining plate of the speedometer and can then jump around in the menu of the speedometer and adjust everything.

If you replace the original speedometer on your Triumph Bonneville T100 or T120 with a smaller one (e.g. one from Motogadget), you will have an unsightly, unobstructed view of the ignition lock. In order to have a nice front view on his Bonneville despite the small speedometer, we have developed the cover. The cover is manufactured in Germany using a 3D printing process. The material is a high-quality, carbon fiber-reinforced plastic, which is surface-finished after printing and painted black satin matt.

The Motogadget motoscope Pro speedometer instrument is the right speedometer for all those who like something more modern. Optically perfect for sporty conversions such as a Triumph Racer Bobber. Attention: to connect the speedometer you need additional modules (see below in the description). The motoscope pro impresses with its ultra-flat housing design. 734 LEDs, controlled by a 16bit Risc processor, form the almost fully self-illuminating display matrix. It ensures optimal readability - even in direct sunlight. Automatic brightness adjustment is a matter of course. An analogue LED band with drag pointer function displays the speed in a freely scalable manner. The main and secondary displays can be configured by the user. Another display area shows the gear engaged. Four indicator lights are already integrated and can be used for many more input signals with the help of the display. For the connection of the indicator lights and/or the measuring inputs, the Breakout Box A is additionally required. The motoscope pro has a complete CAN bus interface and is thus prepared for many future developments of plug 'n ride solutions. The aluminium housing is milled from solid aluminium, anodised and can be easily mounted by two threaded bushes on the back. The instrument has an ABE and does not need to be registered. Please order the breakout box for connecting indicator lights separately. (see accessory article in this description)   Scope of delivery: Instrument with approx. 75 cm connection cableMini-buttonflying fuses6 cable end connectorsSpeedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150 cm connection cable2 strong neodymium mini magnets2 M3 fastening screws with washerQR code for mounting and operating instructions

The lowering puts the original speedometer of the Bonneville T120 & T100 3cm lower. Thus, the machine gets a much nicer line, because the speedometer and the original headlight simply sit too high. In addition, the speedometer also nestles nicer to the upper triple clamp.Does NOT work together with the original lamp holders! We offer this lowering only for customers who have already installed other lamp holders (which are variable in height). For all others we offer a complete plug & play kit (with lamp holder & regulator relocation). See accessories article in this description. Longer screws for mounting the speedometer are included.

Since the speedometer and lamp holder are standard on the Stree Twin, it is not possible to replace the lamp holder.If you want to use a chic holder or another headlight (e.g. a smaller one or one with central mounting), you need exactly this holder to be able to mount the speedometer afterwards.Made of very robust die-cast to withstand the vibrations and shocks while driving without breaking.

The msc Streamline-Cup for 1 inch handlebars is suitable for the assembly of all Classic instruments. Elaborately turned from the solid / milled and highly polished Streamline Cup. Stable attachment with handlebar clamp to 1 inch / inch handlebars. A real eye-catcher for every custom bike.

The mst Groove Cup allows the installation of all analogue tokens of the series tiny at 22mm and 1 inch handlebars. Elaborately made from the solid turned / milled and black anodized Groove Cup for the series Tiny with stylish contrast milling. The mounting clamp is precisely lasered and bent from aluminum and allows a simple but safe mounting on the handlebar. The finish of the Groove Cup with the sculpted lines fits perfectly with the design of the instruments. Diameter 56 mm, length 60 mm.