Original Öhlins strut springs in black for the original Triumph Thruxton 1200 R strut. Since the yellow does not fit to a classic Thruxton, we offer original Öhlins springs in black to rebuild the shock absorbers.We also have the springs in stock in 3 different spring rates, so that the struts can be adjusted to fit the rider's weight.The factory setting can only be set for one basic setup at a time, but not for every rider / weight.Therefore please indicate the rider weight including motorcycle clothing in the comment of the order. The springs can simply be sent by us, or you send us your shock absorbers, we convert the shock absorber to the black springs and send it back to you (depending on the order situation in the workshop between 0-3 days). Please make the desired selection. The price is PAAR for one spring.

YSS Black Line shock for Thruxton 1200, Thruxton 1200 R & Speed Twin The suspension strut has a basic length of 390 mm and can be adjusted by +/- 5 mm due to the integrated length adjustment. Original suspension lengh:Thruxton 1200 R / RS 392mmThruxton 1200 387mmSpeed Twin 384mm With adjustable rebound. Since YSS often uses too hard springs for these types of vehicles, Classicbike Raisch offers the right springs for different weight classes. When ordering, please indicate the approximate rider weight (including motorcycle clothing). We guarantee an absolutely fitting shock absorber specially tuned to each rider. The shock absorbers are delivered with ABE, so they do not have to be registered.The company Classicbike-Raisch is YSS-Service-Partner. We can carry out all revisions, repairs and other customer requests in-house.

YSS shock for Bonneville T100 & T120 / StreetTwin, StreetCup & Street Scrambler The suspension strut has a basic length of 350 mm and can be adjusted by +/- 5 mm due to the integrated length adjustment. With adjustable rebound. Since YSS often uses too hard springs for these types of vehicles, Classicbike Raisch offers the right springs for different weight classes. Please indicate the approximate rider weight when ordering. We guarantee an absolutely matching shock absorber specially tuned to each rider. The shock absorbers are delivered with a model specific ABE and do not have to be registered. Since we only equip the shock absorbers with the appropriate springs when ordering, we can remove the YSS sticker on the piston housing free of charge on request. The company Classicbike-Raisch is YSS-Service-Partner. We can carry out all revisions, repairs and other customer requests in-house.

YSS Black Line shock for Triumph Bonneville T100 + T120 as well as for StreetTwin, StreetCup & StreetScrambler The suspension strut has a basic length of 350 mm and can be adjusted by +/- 5 mm due to the integrated length adjustment. With adjustable rebound. Since YSS often uses too hard springs for these types of vehicles, Classicbike Raisch offers the right springs for different weight classes. When ordering, please indicate the approximate rider weight (including motorcycle clothing). We guarantee an absolutely fitting shock absorber specially tuned to each rider. The shock absorbers are delivered with a model specific ABE and do not have to be registered. The company Classicbike-Raisch is YSS-Service-Partner. We can carry out all revisions, repairs and other customer requests in-house.

YSS shock for Thruxton 1200, Thruxton 1200 R & Speed Twin The suspension strut has a basic length of 390 mm and can be adjusted by +/- 5 mm due to the integrated length adjustment. original shock absorber lengh:Thruxton 1200 R / RS 392mmThruxton 1200 387mmSpeed Twin 384mm With adjustable rebound. Since YSS often uses too hard springs for these types of vehicles, Classicbike Raisch offers the right springs for different weight classes. When ordering, please indicate the approximate rider weight (including motorcycle clothing). We guarantee an absolutely fitting shock absorber specially tuned to each rider. The shock absorbers are delivered with ABE, so they do not have to be registered.The company Classicbike-Raisch is YSS-Service-Partner. We can carry out all revisions, repairs and other customer requests in-house.

YSS Black Line shock absorber with piggyback (reservoir) with adjustable rebound + compression and length adjustment.The top model in the middle class. These YSS shock absorbers offer a very good price/performance ratio and take the suspension of your Triumph to a new level. These shock absorbers are just right for customers who want really good suspension but are not prepared to spend the money on the absolute top-of-the-range (Öhlins). As YSS often installs these shock absorbers ex works with springs that are far too hard for the vehicle types mentioned, Classicbike Raisch offers the right springs for different weight classes. When ordering, please specify the approximate rider weight (including motorcycle clothing). We guarantee an absolutely suitable shock absorber specially adapted to each rider. The spring is selected to suit the rider's weight. We also adjust the spring preload, rebound and compression to customer specifications. Classicbike-Raisch is a YSS service partner. We can carry out all revisions, repairs and other customer requests in-house.   Information Thruxton / Speed Twin 1200 The shock absorber has a basic length of 390 mm and can be adjusted by +/- 5 mm using the integrated length adjustment. The original shock absorbers have a basic length of:Thruxton 1200 R / RS 392mmThruxton 1200 387mmSpeed Twin 384mm The shock absorbers are supplied with ABE, so do not need to be registered Information Bonneville / Street Twin-Cup-Scrambler / Scrambler 900 / Speed Twin 900 - currently not yet available. The shock absorber has a basic length of 340 mm and can be adjusted by +/- 5 mm using the integrated length adjuster. The original shock absorbers have a basic length of:Street Twin / Speed Twin - Cup: 340 mmStreet Scrambler / Scrambler 900: 340mmBonneville T100 / T120: 350mm

Beautiful Öhlins Blackline Trenkolbendämpfer.With adjustable rebound & height adjustment shock absorbers in really nice deep black.The shock absorber has a total length of 392 and is adjustable up to +/- 5 mm. The original shock absorbers have a basic length of:Thruxton 1200 R / RS 392mmThruxton 1200 387mmSpeed Twin 384mmWith special Raisch Set Up, individually adapted to each driver.We deliver the shock absorbers with an ABE, so they can be installed easily and do not have to be registered separately.When ordering, please indicate the rider's weight (with motorcycle clothing) in the comment, so that we can adjust the shock absorber optimally to your weight.

Beautiful Öhlins Blackline Trenkolbendämpfer for Bonneville T100 + T120 / Street Scrambler. With adjustable rebound & height adjustment struts in beautiful deep black. The strut has a total length of 350mm and can be adjusted up to +/- 5mm by the length adjustment. The original struts have a basic length of 350mm. With special Raisch Set Up, individually adjusted to each rider. We deliver the shock absorbers with an ABE, so they can be easily installed and do not have to be registered separately. When ordering, please state the rider's weight (with motorcycle clothing) in the commentary so that we can adjust the shock absorber optimally to your weight.  

Öhlins Trenkolbendämpfer for Thruxton 1200, Thruxton R / RS & Speed Twin.With adjustable rebound & height adjustment.The shock absorber has a total length of 384mm and can be adjusted by up to +/- 5mm due to the length adjustment.The original shock absorbers have a basic length of:Thruxton 1200 R / RS 392mmThruxton 1200 387mmSpeed Twin 384mmWith special Raisch Set Up, individually adapted to each driver.When ordering, please indicate the rider's weight (with motorcycle clothing) in the commentary, so that we can adjust the shock absorber optimally to your weight.We deliver the shock absorbers with an ABE, so they can be installed easily and don't have to be registered separately.

Öhlins shock absorber for the Triumph Bobber / Bobber Black & Speedmaster with adjustable rebound damping and black spring. The original shock absorber is simply far too hard and very uncomfortable (it also has no negative suspension travel). Something has to be done so that you don't get hit in the back with every little bump (which happens very quickly with the sitting position on the bike in conjunction with a bad shock). This is a high-quality separating piston damper and not an emulsion damper like some other manufacturers sell. We supply the shock absorbers with ABE, so that they can be easily installed and do not have to be registered separately. If you want a fully-fledged suspension system on your bobber, we also recommend installing a triple clamp in the fork (see accessories in this description). As there are different spring rates for the shock absorber in order to be able to adjust it to the respective rider weight, please state the rider weight (with motorcycle clothing) in the comments field of the order.

Shock absorber caps including stainless steel screws for the shock absorbers of all Triumph models.The turned caps are either made of aluminium (black anodised or polished) or brass. According to the manufacturer, the shock absorber screws must be replaced after a change. The caps also give a much more harmonious finish to the shocks and the unsightly original screws disappear. On the Thruxton, Speed Twin & Scrambler, only the two upper screws are replaced.

Suspension lift suitable for all Triumph Bobber & Speedmaster 1200 models. Who hasn't experienced this when riding a Bobber? As soon as the nice, winding roads start or you come to a nice big & empty traffic circle, the machine stops. In itself, the Bobber is a good to ride and agile motorcycle, if it weren't for the very low ground clearance..... Here is the solution! As the problem of our Race Bobber touching down early is also very annoying for us, we have developed a suspension lift and now you can finally ride a little faster on bends without having to worry about touching down when riding through traffic circles and making quick turns.The suspension lift is installed in place of the original strut.   The result: - The footrests are 30 mm higher - the 30 mm more ground clearance is very noticeable when leaning and the Bobber / Speedmaster touches down much later.- The seat of the motorcycle is 35mm higher.   Installation: We supply installation instructions with the lift. With a little technical understanding, installation is possible without any problems (installation time: approx. 1 - 1 1/2 hours).   Classicbike-Raisch recommendations: If it is really important to you to be able to ride your Bobber as well as possible and to have more fun and safety even on slightly faster rides, we recommend changing the suspension. To do this, we recommend a new shock absorber and a fork cartridge. You can find both parts under the accessory products in this description.

Shock absorber caps including stainless steel screws for the shock absorbers of all Triumph models.The turned caps are either made of aluminium (black anodised or polished) or brass. According to the manufacturer, the shock absorber screws must be replaced after a change. The caps also give a much more harmonious finish to the shocks and the unsightly original screws disappear. On the Thruxton, Speed Twin & Scrambler, only the two upper screws are replaced.

Öhlins Blackline stereo shock absorber. With adjustable rebound + adjustable compression stage at the expansion tank + adjustable spring preload & additional height adjustment (+/- 5 mm).The absolute high-end shock absorber for your Triumph, you won't find a better one on the market. We deliver the shock absorbers with an operating license, so they can be easily installed and do not need to be registered separately. When ordering, please indicate the approximate weight of the driver (with clothing) in the comment.We will configure your shock absorber individually tailored to your weight class. Because even the best shock absorbers in the world will not produce the desired result if you do not have the appropriate springs tailored to the driver's weight and a suitable setup tailored to the driver's needs. TR 965 - Thruxton 1200 / Speed Twin: The shock absorbers have a length of 392 mm (+ maximum length adjustment of 10 mm). The original shock absorbers have a basic length of:Thruxton 1200 R / RS 392 mmThruxton 1200 387 mmSpeed Twin 384 mm TR 654 - Bonneville T100 - T120 / Street Twin - Cup - Scrambler / Speed Twin 900 / Scrambler 900 : ATTENTION: The ABE only applies to the Bonneville models. All other models must be registered with the TÜV by individual entry. The rear shocks have a length of 348 mm (+ maximum length adjustment of 10 mm). The original rear shocks have a length of:Bonneville: 348 mmStreet Scrambler / Scrambler 900: 348 mmStreet Twin - Cup / SpeedTwin 900: 340 mm

Öhlins stereo shock absorbers. With adjustable rebound + adjustable compression on the reservoir + adjustable spring preload & additional height adjustment (+/- 5 mm).The shock absorber is 387 mm (+/- 5 mm height adjustment) long. original shock absorber lengh:Thruxton 1200 R / RS 392mmThruxton 1200 387mmSpeed Twin 384mmWe deliver the shock absorbers with an ABE, so they are easy to install and do not need to be registered separately. When ordering, please indicate the approximate rider weight (with clothing) in the comment. We configure your shock absorber individually to your weight class.

OEhlins stereo shock absorber for Bonneville T120 & Street Twin/Cup & Scrambler with adjustable rebound + adjustable pressure stage at the expansion tank + adjustable spring preload & additional height adjustment. Information on the Bonnie: Series of springbeads of the Bonneville T120 are 350mm. The OEhlins spring strut has a basic length of 348mm (+ 10mm height adjustment). Information on the StreetTwin : Series springbars of the StreetTwin are 340mm.The Öhlins spring leg has a basic length of 340mm (+ 10mm height adjustment). The shock absorbers are delivered with ABE. So these shock absorbers can be installed easily and do not have to be registered separately. When ordering, please state in the comment the approximate drivers weight (with clothing). We configure their springbones individually according to their weight class.

OEhlins stereo shock absorber for Bonneville T120 & StreetTwin with adjustable rebound + adjustable spring preload & additional height adjustment Information on the Bonnie: Series of springbeads of the Bonneville T120 are 350mm. The OEhlins spring strut has a basic length of 348mm (+ 5 / -5mm height adjustment). Information about StreetTwin : Standard springbars of the StreetTwin are 340mm. The OEhlins spring strut has a basic length of 340mm (+ 8 / -2mm height adjustment). The shock absorbers are delivered with ABE. So these shock absorbers can be installed easily and do not have to be registered separately. When ordering, please state in the comment the approximate drivers weight (with clothing). We configure their springbones individually according to their weight class. Spring struts for the Thruxton 1200 will follow in the near future.

Ikon stereo struts for Bonneville T100 & T120 as well as StreetTwin, Cup and Scrambler. Very good middle class dampers in classic design. The original dampers far ahead. 345mm long, adjustable compression as well as an adjustable rebound. With ABE for T120 & StreetTwin. Available in chrome or black finish.

Ikon stereo struts for Thruxton 1200. Also fits the R for those who like it classic (but with the R but no improvement da). Very good middle class dampers in classic design. The original dampers far ahead. 345mm long, adjustable compression as well as an adjustable rebound. With ABE. Available in chrome or black finish. And in 385 or 395mm total length.