Original Parts Black Coating

Please choose your bike

Foot rest R9T black powder coating CB11967 / RS0

Also the footrest support plate and the heel guard, like most metal parts on the R9T's, have the unsightly die-cast surface, which does not look very noble. But we can also powder coat them black! Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Many would like to have a black footrest. The first consideration would be a completely new detent system, e.g. from LSL or Rizoma, which is clearly the most beautiful solution. But if that is too expensive for you, you can get a cheap alternative by having the carrier plate and the heel protection coated in black, ordering black detents and a black gearshift (you can find suitable articles under the accessories products in this description). You just send us your two footrest support plates + heel guard right, we sandblast them, stick all parts that have to remain free and coat them black (RAL9005) The brake light switch is attached to the detent carrier plate with 2 notched nails ex works. These must be drilled out for coating and then hammered in again (you can order new notched nails with the switch, see accessories in this description). If you do not want to do this work yourself, you can order the article "Drill / hammer in notched nails R9T carrier plate" (see accessories in this description). Duration until you have your part black coated again: approx. 2 - 3 weeks.

€130.00*

Foot rest R9T black powder coating CB12112 / RS0

The gear levers, like most metal parts on the R9T's, have the unattractive die-cast surface, which doesn't look very classy. But we can also coat them with black powder! Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Together with the black coating of your R9T's footrest system (see accessories article in this description), you get a completely black footrest system. You simply send us your gear lever, we sandblast it, tape all the places that have to remain free and coat it black (RAL9005). Duration until you have your part coated black again: approx. 2 - 3 weeks.

€45.00*

Black Powder coating fork bridges CB11476 / RS0

BLACK BLACK BLACK. Like so many parts on the R9Ts, the triple clamps also have the unattractive die-cast surface look, which does not look very classy! So that the triple clamps get a nice & smooth surface in black, we also offer for this the powder coating in black (other colors only on request and with exact RAL tone specification!). Black are made: upper & lower triple clamp. We also recommend the lamp holder and the steering damper holder to be coated black (both parts can be found under the accessories in this description). Duration until you get the part back is about 2 - 4 weeks.

€155.00*

Speed rings black coated CB11478M / RS0

Of course, the speedo rings in black should not be missing! Where does the driver look more than the speedometer? And who is on black, of course, must have the rings in black! Duration until you recover the part is about 1 1/2 - 2 weeks. By default, we always do the parts in black. Semi-matt several other colors are of course also possible on request (but then the exact RAL tone must be specified).

From €30.00*

Details

upper triple clamp R9T Racer black coating CB11646 / RS0

BLACK BLACK BLACK. Like so many parts on the R9T models, the upper (visible) triple clamp of the R9T Racer has the ugly die-cast surface look, which doesn't look very noble! So that the triple clamps get a nice & smooth surface in black, we also offer powder coating in black. (other colours only on request and with exact RAL tone!) Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black.It will take about 1 1/2 - 2 weeks until the part is finished.

€85.00*

Handlebar mount black coated - R9T CB12599 / RS0

Black complacent? If you want to pull a black line on your R9T, you should also be able to coat the original signals with a nice handlebar mount black. Actually, because: here, too, we have the ugly die-cast look that hardly anyone likes. Very effective both as a contrast with the original silver handlebar and together with a black handlebar! Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Duration until you recover the part is about 4-6 weeks By default, we always do the parts in black. Semi-matt several other colors are of course also possible on request (but then the exact RAL tone must be specified).

€90.00*

Screw Set Black R9T CB11442 / RS0

A complete stainless steel Torx bolt set with black coated screw heads for BMW R9T. True to the motto "Black is beautiful" almost all visible screws in black are included in the set to replace them with the original ones. All included screws are A2-70 stainless steel and have been powder coated in a nice black matte. Optically great, if the screws should not attract attention. No chipping off the paint! The screws are neatly packed in bags for the respective engine cover. The exchange is thus very easy. It is exchanged one screw after the other. As a result, no new seals are needed. The end cover screws are included in this set. The kit includes the screws (cylinder head, as well as Linsenkopf) and needed U-washers for: - front cover - Crankshaft sensor - Oil cooler cover - Oil cooler mounting - Oil cooler line - Oil cooler supply line - Oil cooler line return - starters - intake manifold - Apprentice trainee - Throttle valve switch

€58.90*

Front cover screws Black R9T CB11443 / RS0

Stainless steel Torx bolt set for the front cover of the BMW R9T. True to the motto "Black is beautiful" are in the screw set all the screws to replace it with the original silver on the front cover of the R9T. All screws included (ISO 14579) are A2-70 stainless steel and have been powder coated in a beautiful black matte finish. No chipping off the paint! The screws are neatly packed in bags for the respective engine cover. The exchange is thus very easy. It is exchanged one screw after the other. As a result, no new seals are needed.

€34.90*

Headlight R9T black coating CB11436 / RS0

True to the motto "black is beautiful" you can send us your silver lamp ring and we will send it back in black coated. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Duration until you have the part wiede is between 2 -3 weeks. As standard, we always make the parts in black. Silk matt and many other colors are of course also possible on request.

€35.00*

Headlight R9T black coating CB11703 / RS0

True to the motto "black is beautiful" you can send us your original BMW R nine T lamp topg and we send it back to you in black coated. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. It will take 2 - 3 weeks until you have it back. By default we always make the parts in black silk matt. Several other colours are also possible on request.

€55.00*

Original cream border black CB10734 / RS1

Colour: Black

If the cast triangle does not look noble enough, the silver does not like, or it simply wants to have black (black is beautyful) we offer to the black with us powder. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black.Duration until their part is about 1 1/2 - 2 weeks. By default, we always make the parts in black satin or black glossy (please choose). Other colors are of course also possible on request. The price is for the coating of both triangles.

€80.00*

Original frame triangle black powdercoated accents CB11454 / RS1

Colour: Black

If the cast triangle does not look classy enough (because the original surface makes a pretty cheap impression), the silver does not like it, or it just wants to have black (black is beautiful) we offer it to us to have black powder. In this version, the original holes are reworked after the coating. This gives them a self-border, which makes the Rahmedreck look like a Fästeil optically. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Duration until you recover the part is about 1 1/2 - 2 weeks. By default, we always make the parts in black satin or black glossy (please choose). Other colors are of course also possible on request. The price is for the coating of both triangles.

€125.00*

Fork feets R9T black painting CB11435M / RS9

Who does not like the original, silver fork feet on his R9T, they can simply be coated black with us. Simply send the disassembled fork to us and you get it back with black fork feet. Who can not disassemble itself, which can also simply send the whole fork to us and we take over the work for you, in our chassis department. For this you choose the variant with assembly, then you just send us the dismantled fork, we disassemble it here on site and then reassemble it after coating. Directly with better oil, whereby the response of the fork is slightly improved. Duration until you have the part back is about 2 - 4 weeks. By default, we make the parts always in black satin. Several other colors are also possible on request. The price is for the coating of both fork legs. Looks especially good in conjunction with black fork tubes. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Duration until you have finished the part is about 2 - 3 weeks. As standard, we always make the parts in black. Silk matt and many other colors are of course also possible on request. The price is for the coating of both fork feet. Looks great in conjunction with black fork tubes.

From €180.00*

Details

R9T fork black anodize CB11301M / RS9

Since many people don't like the gold fork on the R9T, we looked for a way to get it reasonably black without having to buy a complete Öhlins fork. We offer a very high-quality black anodising for the fork tubes, which give the bike a completely different look. For this, the dismantled, disassembled & cleaned fork tubes have to be sent to us. Or you can choose the assembly option, in which case you simply send us the dismantled fork, we disassemble it here on site and then reassemble it after anodising. Directly with better oil, which improves the response of the fork. Anodising & shipping takes between 6 - 10 weeks. If that takes too long, you can opt for new stanchions, which we have in stock (see similar items in this description). Attention: blackening of the fork legs is not included (extra items see accessories).

From €259.96*

Details

Footrests R9T black Powder coating CB12321 / RS52

You like the original rests of your machine, but you do not like them in silver? Then just send them to us and we will coat it black satin (RAL9005) powder. The price is for ONE PAIR of pegs. Please remove all attachments like rubbers or similar from the footrests and do NOT send them to us! Please note that the coating in the area where the foot rests will wear off over time. The processing time is approximately 3-4 weeks. Attention! we offer here only the service of the coating. The original part must be delivered to us by the customer.

€60.00*

Break lever black coating CB12319 / RS600

Black is beautiful! True to this motto, we offer you the possibility of virtually all metal attachments of your machine to send to us and we powder coat them to you in black satin and send them back to you. Simply send us the dismantled brake lever and we will take care of everything else. Delivery time is about 2-3 weeks. Attention! We offer here only the service of coating. The original part must be delivered to us by the customer.

€45.00*

Coat lamp holder black CB12378 / RS600

Who can coat his triple clamps black, which should also coat the lamp holder of his R nineT, because this part is directly on the lower triple clamp. Duration until you have the part back is about 2 - 4 weeks.

€15.00*

Steering damper bracket black coating CB12379 / RS600

Also the small steering damper holder of your nineT we can coat you black. This we can especially recommend if you have your triple clamps coated black, because the holder is screwed directly to the bridge. Duration until you have the part back is about 2 - 4 weeks.

€25.00*

Valve cover black coated CB11051 / RS600

If the gray of the cylinder head cover does not like because it is in contrast to the cylinder ribs simply does not fit, we offer to the black with us powder. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Duration until their part is about 1 1/2 - 2 weeks. As a rule, we always make the parts in black silk mats. Many other colors are also available on request. The price is for the coating of both valve covers.

€199.00*

Airtunel black coated CB11052 / RS600

If the silver of the original air tunnel does not like, or it simply wants to have black (black is beautyful) that we offer to the black with us powder. Duration until their part is about 1 1/2 - 2 weeks. As a rule, we always make the parts in black silk mats. Many other colors are also available on request. Note: This is just the service to powder coat YOUR cover in black.

€60.00*

Original fender holder black CB10735 / RS600

If the castors do not look noble enough, the silver does not like, or it simply wants to have black (black is beautyful) we offer to the black with us powder. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Duration until their part is about 1 1/2 - 2 weeks. As a rule, we always make the parts in black silk mats. Many other colors are also available on request. The price is for the coating of both holders.

€65.00*

Original fender holder black CB11647 / RS600

If you don't like the unattractive cast surface of the original fender holder on your R9T Racer, Scrambler, Pure or Urban GS noble enough, don't like the silver, or just want it black (black is beautyful), we offer you to have it powdered black. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. It will take about 1 1/2 - 2 weeks until you have the part.By default, we always make the parts in black silk matt several other colors are also possible on request of course (but the exact RAL tone must be specified by the customer).

€45.00*

Original R9T manifold black ceramic coating CB12187 / RS600

Keramic Black MATT coating of your original BMW manifold. You send us your original manifold and we send it back to you black ceramic coated. Duration for this is about 2 - 3 weeks. The price is only for the complete manifold including catalytic converter (bracket, clamp or other things that are given with it, will be charged additionally).

From €380.00*

Details

Coating handlebar risers R9T CB11477 / RS601

You have a black handlebar clamp on your R9T and would like to have the risers in matching black?No problem, send us your handlebar riser and we will take care of the powder coating. It will take about 4 - 6 weeks until you have the part back. We always make the parts in black silk matt as standard. A number of other colors are of course also possible on request (however, the exact RAL shade must then be specified). Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black.

€40.00*

ESD Black Ceramik Coating CB10701 / RS601

We coat your original rear silencer black. Many would like to have a black exhaust, but don't want to buy a completely new one. We have the solution. You send us your original muffler and we coat it in black matt with a heat resistant ceramic coating. takes about 2-3 weeks. Attention! With this article you order ONLY order the SERVICE

€300.00*

Exhaust holder disc black coating CB11053 / RS800

Who can be the original exhaust holder coated black, which usually wants to have the disc additionally black.The disc simply send to us and we take care of everything. Duration until you have the part back is about 4 - 6 weeks. By default, we make the parts always in black satin. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Duration until their part is about 1 1/2 - 2 weeks. As a rule, we always make the parts in black silk mats. Many other colors are also available on request.

€20.00*

Tip

Frame triangle sleeves black coating CB12441 / RS800

Many who have the original frame triangles coated black, would also like to have the sleeves additionally in black. For this, simply order this article and send it to us. Duration until you have the part back is about 4 - 6 weeks. By default, we always make the parts in black satin. Attention! With this article you order ONLY order the SERVICE that we powder coat your original parts. So you have to send us your parts and we will send them back after we powder coated them in black. Duration until their part is about 1 1/2 - 2 weeks. As a rule, we always make the parts in black silk mats. Many other colors are also available on request.

€20.00*

Exhaust bracket sleeve black coating CB12636 / RS800

If you have the original exhaust bracket coated black, you usually also want the sleeve that sits in the bracket to be black.Simply send the disk to us and we will take care of everything. It takes about 4 - 6 weeks to get the part back. We always make the parts in satin black as standard. ATTENTION! This article is only the SERVICE of the coating, the part must be sent to us in advance.

€20.00*