HKS Chain Spray Extreme
![HKS Chain Spray Extreme](https://www.classicbike-raisch.de/media/image/27/ac/df/HKS-EX-S_600x600.jpg)
- item - nr: HKS.EX.S
- Shop - nr.: CB12348
HKS Extreme Chain Spray 300ml is probably the best and longest lasting chain spray available for motorcycles.
Tip:
- Who does not like chain sprays, because with these you also always something the motorcycle eingesaut, for which there is the HKS Extreme also from the Trop bottle (see accessories article in this description.
- For a beautifully maintained and clean chain, we still recommend the HKS cleaning spray (see accessories article in this description).
Description:
Pure synthetic lubricant with white solid lubricants NEW FORMULA.
HKS extreme New Generation is the answer against wear in new scales.
HKS extreme New Generation is a lubricating coating with excellent viscosity and thermophysical properties. The lubricant, which initially has a low viscosity when applied, penetrates into the smallest cavities due to the integrated capillary effect, so that optimum lubrication is always ensured, even in the chain interior, the highly stressed chain pins. After 3-5 minutes evaporation time a lubricating film similar to a plastic coating with long-term effect is formed. HKS extrem New Generation allows the chain to glide along almost wear-free, quiet and damped, even at the highest speeds, for extremely long lubrication intervals.
HKS extrem creates a durable, thick, absolutely waterproof lubricating film
similar to a plastic coating
HKS extrem has an extreme suction effect and penetrates to the highly loaded friction points.
friction points
HKS extrem seals against dirt and water
HKS extreme is guaranteed not to be thrown off
HKS extrem significantly reduces chain adjustment
HKS extrem ensures smooth running without loss of performance
HKS extreme has a noise and jerk damping effect
HKS extrem no chain cleaning for relubrication
HKS extreme absolutely O/X/W ring compatible
2500 km chain lubrication intervals
6 properties that only HKS offers!
1. sealing effect: prevents penetration of dirt and water
2. long-term lubricating film: 5 x longer lubrication intervals than conventional chain lubricants
3. quick readiness for use: ready for use in 3-5 minutes after application, guaranteed not to be thrown off
4. 5 x thicker lubricating film layer thickness: has a noise-pressure damping and wear-reducing effect
5. ultra-fine dosing: enables economical and targeted consumption without environmental contamination
6. optimal supply of the chain interior: sucks to the highly loaded chain pins
Application Tip:
Step 1:
The motorcycle chain should be free of grease before the first HKS extreme application.
We therefore recommend a prior application of HKS-R high performance chains and rims special cleaner so that an optimal chain cleaning is ensured and the lubricating film to be applied afterwards can adhere optimally.
Step 2:
Jack up the machine on the main stand or free the rear wheel.
Mark the initial application point on the chain wheel in the middle of the chain wrap and start applying the HKS extreme there. The chain is loose and kinked in the area of the middle of the chain wrap. The HKS extrem, which is extremely thin at first, can thus reach the highly loaded chain pins and refresh the internal lubrication (provided the X/O rings, which are usually "tired" and leak after about 3000- 5000 km).
Step 3:
1. shake HKS extreme spray can well, the lubrication process should be done in 4 passes.
2. two passes each right and left between the inner and outer lug.
3. two passes each on the right and left between the inner plate and the roller.
For narrow chains, spraying between the outer plate and the inner plate is sufficient.
The distribution in the roller area results by itself.
HKS can be applied in extremely fine doses by applying slight finger pressure to the fine dosing spray head.
Minimal ambient fogging and economical consumption are the success.
During spraying, keep turning the chain until the initial application mark is reached. - Do not omit any chain link! Process should not be repeated, evaporation time and sealing effect start immediately.
5. Allow to evaporate for 3-5 minutes, then drive immediately.
HKS extreme is compressed by the tensile load that occurs when accelerating, resulting in the formation of a lubricating film that acts like a plastic coating and therefore does not allow foreign bodies to adhere to it.
Tip:
For the formation of the coating effect - motorcycles from the Enduro range approx. 5 km on firm asphalt drive. As soon as the first 2-5 rollers become bare, relubricate as prescribed. Chain cleaning is not necessary if HKS extrem is used exclusively.
The HKS extrem lubricating film has a long-term lubrication behavior for extremely loaded chains. For example, one lubrication lasts for at least 2,500 km on a 100 HP machine. When used correctly, HKS extreme is very productive and it is impossible for it to spin off.
Triumph 400er: |
|