HKS extreme chain grease
![HKS extreme chain grease](https://www.classicbike-raisch.de/media/image/59/95/ed/HKS-EX-V_600x600.jpg)
- item - nr: HKS.EX.V
- Shop - nr.: CB12349
The HKS Extreme chain grease is probably the best and longest lasting chain spray that is available for motorcycles.
The HKS Extreme chain grease in 500ml storage container including aufträufel bottle (for perfectly dosed and dirt-free application).
Tip:
- Alternatively also available as a spray. See accessories article in this description.
- For a beautifully maintained and clean chain, we recommend the HKS cleaning spray (see accessories article in this description).
Description:
Pure synthetic lubricant with white solid lubricants NEW FORMULA.
HKS extreme New Generation is the answer against wear in new scales.
HKS extreme New Generation is a lubricating coating with excellent viscosity and thermophysical properties. The lubricant, which initially has a low viscosity when applied, penetrates into the smallest cavities due to the integrated capillary effect, so that optimum lubrication is always ensured, even in the chain interior, the highly stressed chain pins. After 3-5 minutes evaporation time a lubricating film similar to a plastic coating with long-term effect is formed. HKS extrem New Generation allows the chain to glide along almost wear-free, quietly and damped, even at the highest speeds, for extremely long lubrication intervals.
HKS extrem creates a durable, thick, absolutely waterproof lubricating film
similar to a plastic coating
HKS extrem has an extreme suction effect and penetrates to the highly loaded friction points.
friction points
HKS extrem seals against dirt and water
HKS extreme is guaranteed not to be thrown off
HKS extrem significantly reduces chain adjustment
HKS extrem ensures smooth running without loss of performance
HKS extreme has a noise and jerk damping effect
HKS extrem no chain cleaning for relubrication
HKS extreme absolutely O/X/W ring compatible
2500 km chain lubrication intervals
6 properties that only HKS offers!
1. sealing effect: prevents penetration of dirt and water
2. long-term lubricating film: 5 x longer lubrication intervals than conventional chain lubricants
3. quick readiness for use: ready for use in 3-5 minutes after application, guaranteed not to be thrown off
4. 5 x thicker lubricating film layer thickness: has a noise-pressure damping and wear-reducing effect
5. ultra-fine dosing: enables economical and targeted consumption without environmental contamination
6. optimal supply of the chain inner life: sucks to the highly loaded chain pins
Application note:
The alternative to spraying
HKS Aufaufufler is suitable for extremely economical, targeted and effective use without ambient fogging
Step 1:
The motorcycle chain should be free of grease before the first HKS extreme application. We therefore recommend a prior application of HKS-R high performance chain and rim special cleaner so that an optimal chain cleaning is guaranteed and the lubricating film to be applied afterwards can adhere optimally.
Step 2:
Jack up the machine on the main stand or free the rear wheel. Mark the initial application point on the chain wheel in the middle of the chain wrap and start applying the HKS extreme there. The chain is loose and kinked in the area of the middle of the chain loop. The HKS extrem, which is initially extremely thin, can thus reach the highly stressed chain pins and refresh the internal lubrication (provided the X/O rings, which are usually "tired" and leaking after about 3000- 5000 km)
Step 3:
1. cut drift tip at an angle to create a tiny opening.
2. remove the tip attachment and fill up the drizzle from the well-shaken 500 ml can. Then put the tip attachment back on.
3. shake the applicator well. 4.
The lubrication process should be carried out in 4 passes.
Two passes each on the right and left between the inner and outer tabs.
Two passes each on the right and left between the inner plate and the roller.
- Do not omit any chain link!
5 During the application process, continue to turn the chain until the initial application mark is reached. Process should not be repeated, evaporation time and sealing effect start immediately.
6. Allow to evaporate for 3-5 minutes, then drive immediately. HKS extreme is compressed by the tensile load which occurs when accelerating, resulting in the formation of a lubricating film which acts like a plastic coating and therefore does not allow foreign bodies to adhere to it.
Tip:
For the formation of the coating effect - motorcycles from the Enduro range approx. 5 km on firm asphalt drive. As soon as the first 2-5 rollers become bare, relubricate as prescribed. Chain cleaning is not necessary if HKS extrem is used exclusively. The HKS extrem lubricating film has a long-term lubrication behavior for extremely loaded chains. For example, one lubrication lasts for at least 2,500 km on a 100 HP machine. When used correctly, HKS extrem is very productive and sloughing off is impossible.
Triumph 400er: |
|