€0.00*

Short Rear Fender Kit Bobber

€698.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
€269.95*
from €349.00*
from €329.00*
from €31.95*
Product number: CB11411
item number: 106484-F15
Product information "Short Rear Fender Kit Bobber"

A short fender for the Bobber, which replaces the original, quite long, as well as the huge traffic lights can be omitted. The fender is unpainted, can be painted as desired or simply installed as is, the metal look fits very well to the Bobber (but must then be painted with clear lacquer and powder coated mandatory, otherwise the steel will rust). A matching front fender in the same design is also available (see accessories in this description).

The kit was developed as customer-friendly as possible, i.e. all original brackets were taken over, so that the kit can be mounted plug&play without much tinkering. Included are the two milled support braces with integrated tail light / turn signal combination (with E-number). The cables of the turn signals run inside the struts, so that they can be routed as invisible as possible.

We recommend to the kit the side license plate holder from our range (see accessories in this description).

For easier installation / wiring, we recommend the matching Raisch cable set to order. You can find it under the accessories in this description.
Attention on models from model year 2023: According to the installation instructions from Wunderkind, a blocking diode must be installed in the rear lights on these models (included in the scope of delivery). If you order our cable set in addition, you can save yourself this work, as a diode is already installed in the cable set.

The fender is available in 3 variants.

Variant 1: Raw untreated steel

Variant 2: Black satin powder coated (similar surface as most motorcycle frames)

Variant 3: Black high gloss powder coated. This coating comes, by the extremely high-quality powder is used, a black glossy paint really very close (see photos)!
However, you should not expect a 110% perfect surface as from a painter who primed and sanded the fender beforehand.

Since the fender is handmade stainless steel, it has texture and slight imperfections (which you can easily see even after powdercoating). If you want it perfect or in a different color, you will need to have the fender primed and then painted. However, we would then still recommend to have the fender powder-coated in advance, as this serves as a perfect rust protection (but then variant 2 black matt is sufficient). 

Triumph LC models from 2016:
  • Bobber
  • Bobber Black
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Bobber - Short Steel Front Fender
Bobber - Short Steel Front Fender CB12537 / RS0
This short steel fender replaces the original fender, which is significantly longer.Unlike the short fender from the Triumph accessories, the Motone fender has no bead in the middle, which is visually much better to the short rear fender conversions, which also have no bead (matching rear fenders can be found under the accessories products in this description). The fender is made of sturdy steel, which, as with the original fender, further ensures the stiffening between the fork legs. The fender is supplied in glossy black.

€269.95*
Licensplate Holder site ways CNC
Licensplate Holder site ways CNC CB11182M / RS2
This is how it should look on a real bobber! On a bobber, the license plate simply belongs on the side and not on the fender. The side license plate holder from Wunderkind also fits the Triumph Bonneville T100 / T120 - Street Twin / Scrambler / Cup - Scrambler 900 - Speed Twin 900 The holder is very elegantly CNC-milled and black anodized. There is an optional holder for all those who want to continue using the original rear light of their Bobber & a reflector fits on the Kz holder (see accessories in this description). Details at a glance+ Laterally mountable license plate holder+ 3-stage width adjustment of the plate (towards or away from the wheel) + Possibility to tilt the plate by 30+ Integrated LED lighting + License plate can be inserted into the frame from above + Concealed cable routing + Surface finish with BLACKPearl anodized + CNC-milled aluminium+ Design: WUNDERKIND-Custom The bracket is supplied with a parts certificate for the Triumph Bobber & Speedmaster.For all other models (Bonneville / Street / Scrambler / Speed) it must be registered individually (which is not a problem due to the existing parts certificate).ATTENTION for Bonneville models: On these models, the NCIHT holder fits together with the original exhaust. The license plate is optionally available for German (standard and 200x220 size), Austrian, Swiss and French license plates.

From €349.00*
Details
Steel Front Fender Bobber
Steel Front Fender Bobber CB11413M / RS2
Metal front fender for the bobbers.Can be exchanged Plug&Play. Can be painted if necessary or simply installed in the Steel look (but must then be painted with clear varnish and powder coated, otherwise the steel will rust). Harmonizes perfectly with the Steel-look rear fender kit (see accessories in this description).The fender is available in 3 versions.Variant 1: Raw untreated steelVariant 2: Black silk matt powder coated (similar surface as most motorcycle frames)Variant 3: Black high gloss powder coated. This coating comes, by the extremely high-quality powder that is used, a black shining lacquering really very close (see photos)!But you can't expect a 110% perfect surface like from a painter who primes and grinds the fender beforehand.Since the fender is made of handmade stainless steel, it has a structure and slight unevenness (which you can easily see after powdering). If you want it perfect or in a different colour, you have to prime the fender and then have it painted. But we would still recommend to powder the fender in advance, because this is the perfect rust protection (but then variant 2 black matt is sufficient).If you would like to have the mudguard powder-coated in black (silk matt), you can order the product "Surcharge mudguard black" in the accessories of this description. Since the fender is made of handmade stainless steel, it has a structure and slight unevenness (which can be easily seen after powder coating). If you want it to be perfect you have to prime the fender and then have it painted. However, we would still recommend to have the fender powdered beforehand, as this serves as perfect rust protection.The black detail photos show the rear bobber fender and serve only to illustrate the colour tone.

From €329.00*
Details
Wiring harness accessories taillight & turn signal - LC
Wiring harness accessories taillight & turn signal - LC CB11222M / RS600
This cable set fits into the original wiring harness with the plug. The open cable ends only need to be connected with blinkers or rear lights from our program (soldering or crimping). Then just heat the shrink tube, heat it up with the lighter, and the professional electrical connection is ready.

From €31.95*
Details