€0.00*

Race Bobber rear mudguard

€289.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

product-image
Zubehörartikel
from €199.00*
from €49.95*
€219.00*
from €349.00*
from €279.00*
€19.90*
€249.95*
€114.95*
Product number: CB12622
item number: TB-HF-SS-RAW
Product information "Race Bobber rear mudguard"

Shorty Slim rear wheel fender for Triumph Bobber.
Probably the narrowest and sportiest fender available for bobbers.
Known from our Race Bobber conversions, on which we install the fender.

The fender is just right for you if you want to give your Bobber a slightly sporty touch or even convert it to racing tires (as shown in the product pictures). The short and narrow line offers a very clear view of the rear tire.
On the one hand, this provides minimal splash protection (shock absorber, battery, airbox and electrical components are fully protected) and on the other, a short, sporty mudguard looks even better than none at all.

The mudguard mounting system allows you to position the mudguard individually. This is because the distance between the fender and tire is freely adjustable.

Especially if you are aiming for a sporty look, the mudguard should be positioned close to the tire. This adjustment can easily be made on the suspension system of our fender.

The mudguard can also be optimally adjusted when using different tire types. Note, however, that a tire expands at high speeds. Therefore, a minimum clearance of 7 mm should be set.

For an even more minimalist look, the mounting point for the original chain guard can be removed. You can remove this if you want to use our short chain guard or even ride without it at all.

Like all KRT Framework parts, this mudguard is manufactured by Marvin (KRT) himself. From the prototype to the mold production to the finished carbon part, all work steps are carried out in-house. Our mudguards are manufactured using the RTM process, whereby the carbon fiber is impregnated with resin under vacuum and heat. This process enables extremely light and precisely fitting components. The fibers and resins used for production meet current aviation standards and are also used in the construction of rotor blades.

 


Versions and their surfaces:

The mudguard is available in a visible carbon version, for which we use a carbon canvas fabric that is also used by Ducati and Porsche. On request, owners of a Bobber TFC can obtain a special version in which we use a twill weave. The matt finish visually matches the original carbon parts of the TFC. However, as the TFC is limited, this part is only produced on request.

We also offer two ready-painted versions:

one in gloss black and one in matt black. Both match the original colors. For those looking for individual color options, an unpainted RAW version is available. This is primed and optimally prepared for an individual paint job by your painter.

 

Matching accessories:

To build a complete rear kit around the short mudguard, other accessories such as license plate holder, indicators / rear light, short chain guard and a matching front mudguard are also available.
You can find our product recommendations for the short mudguard under the accessories in this product description.

Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

Side Mount Lizenz support Bobber / Speedmaster
Side Mount Lizenz support Bobber / Speedmaster CB12108M / RS2
Three-piece licence plate holder made of 3mm aluminium or stainless steel for Triumph Bobber / Bobber Black & Speedmaster 1200, from our friend KRT Framework.Like all parts made by KRT, the side licence plate holder is of the highest quality and perfectly thought out. The scope of delivery includes all mounting materials as well as a number plate light. The two aluminium support plates make it possible to mount the unit without screws or cables. Long holes paired with three different hole patterns allow mounting in your desired position (side and height are adjustable). The licence plate holder is available with different plates for the countries (Germany, Austria, Switzerland, France, Netherlands, Belgium. Please choose in the selection) Dimensions of the license plates for the different countries: Germany: 180 x 200 mmSwitzerland: 180 x 140 mmAustria: 210 x 170 mmFrance: 210 x 130 mmNetherlands: 210 x 140 mmBelgium: 210 x 140 mmItaly: 177x177 mmSpain: 220x160 mmUSA: 178x102 mm

From €199.00*
Details
Chain Guard Kit - Short
Chain Guard Kit - Short CB12459M / RS0
Classicbike-Raisch aluminum chain guard in the Short version - Made in Germany. The Short chain guard kits define a chain guard completely new. As minimalist as possible and running close to the chain, they provide a radical design and fulfill their most important purpose (not to get into the chain).In the chain guards is the design aspect absolute priority and not the splash protection (true to the motto: Who wants to be beautiful must suffer). A reasonably lubricated chain with modern, high-quality chain grease (such as the Motul Chain Lube) from our range but also do not splash much. In the kits, everything is included that is needed for assembly.Depending on the model, the scope of delivery still includes an additional chain guard fin, which is mounted in the middle of the swingarm to guarantee protection here as well. The Raisch chain guards are made of 3mm aluminum in Germany and then black powder coated.

From €49.95*
Details
Frame Flasher Bobber
Frame Flasher Bobber CB12617 / RS5
Plug & play indicator/tail light combination, specially developed and manufactured for the Triumph Bobber. Very bright thanks to modern SMD LED technology.Made in Germany. The set is fully wired and no soldering or crimping work is required for installation. We deliver the indicator/rear light set already wired so that it can simply be connected plug & play to the original plug connection behind the battery of the Bobber. We have also integrated a cable for the license plate light into our blinker wiring harness and fitted it with a socket. The cable for the license plate light was deliberately left long so that it can be routed to the axle mount. So it's up to you which side license plate holder you choose. This kit has been specially developed for short mudguards, such as the short version from KRT (see accessories article in this product description).We have chosen the position of the indicators to be as inconspicuous as possible, but made sure that they are clearly visible during operation. Unfortunately, this position does not comply with the road traffic regulations (StVO) and may not officially be used in road traffic, as the indicators are too far away from the end of the rear wheel (however, a 100% clear and very good view of the 3-1 indicators is given, which is why we have no safety concerns with this kit).Even though the indicators have an E-mark, the short mudguard leaves little room for maneuver when positioning the indicators.

€219.00*
Licensplate Holder site ways CNC
Licensplate Holder site ways CNC CB11182M / RS2
This is how it should look on a real bobber! On a bobber, the license plate simply belongs on the side and not on the fender. The side license plate holder from Wunderkind also fits the Triumph Bonneville T100 / T120 - Street Twin / Scrambler / Cup - Scrambler 900 - Speed Twin 900 The holder is very elegantly CNC-milled and black anodized. There is an optional holder for all those who want to continue using the original rear light of their Bobber & a reflector fits on the Kz holder (see accessories in this description). Details at a glance+ Laterally mountable license plate holder+ 3-stage width adjustment of the plate (towards or away from the wheel) + Possibility to tilt the plate by 30+ Integrated LED lighting + License plate can be inserted into the frame from above + Concealed cable routing + Surface finish with BLACKPearl anodized + CNC-milled aluminium+ Design: WUNDERKIND-Custom The bracket is supplied with a parts certificate for the Triumph Bobber & Speedmaster.For all other models (Bonneville / Street / Scrambler / Speed) it must be registered individually (which is not a problem due to the existing parts certificate).ATTENTION for Bonneville models: On these models, the NCIHT holder fits together with the original exhaust. The license plate is optionally available for German (standard and 200x220 size), Austrian, Swiss and French license plates.

From €349.00*
Details
Side mount License support Rear Tire
Side mount License support Rear Tire CB12107M / RS2
This side license plate holder is mounted on the left side of the swingarm of your machine. The license plate then sits behind the rear wheel (a registration at the TÜV is not necessary).As well as all parts that come from the house KRT Framework, the side license plate holder is of the highest quality and absolutely perfectly thought out. The license plate holder is welded together from bent tubes as well as laser cut parts. The license plate is then mounted on the high-quality anodized license plate holder plate.Visually just cool as well as on a bobber or a sporty Thruxton / Speed Twin to get a clean rear. Included are all mounting materials and a small LED license plate light (with E-number). The cables are routed through one of the two tubes so that they are not visible. If you want to mount your turn signals directly on the license plate (as well as on the blue Speed Twin on the pictures), you can order a set of "turn signal holder KRT" in addition (see accessory article in this description). If you want to be 100% legal on the road, it is also necessary to have a reflector on the bike. A directly suitable for the license plate holder is also available from KRT (see accessories article in this description). Note to Thruxton & Speed Twin: Who wants to install the side license plate holder and dismantle the fender, which can still order the bottom shell from our range. You can find this under the accessories in this description. The license plate is available for different countries in different sizes. Dimensions of the license plate for the different countries: Germany: 180 x 200 mmSwitzerland: 180 x 140 mmAustria: 210 x 170 mmFrance: 210 x 130 mmNetherlands: 210 x 140 mmBelgium: 210 x 140 mmItaly: 177x177 mmSpain: 220x160 mmUSA: 178x102 mm

From €279.00*
Details
Indicator Brackets Bobber Frame
Indicator Brackets Bobber Frame CB12172 / RS3
The turn signal holder Frame for Bobber & Bobber Black allow the mounting of all turn signals with M8 thread on the inside of the frame on your Bobber. Visually, the turn signals are here as good as no longer noticeable, if you use nice small. From behind they are nevertheless very well visible, since they are higher than the rear wheel & the fender. In the pictures 3-1 turn signals are installed which combine tail light, brake light & turn signal in one. We then did not install a central tail light on the Bobber. This makes for an extremely tidy tail. Included with, are 2 black plastic caps that are pushed over the nuts of the turn signals so that they do not stand out. The holders are made of aluminum and then black powder coated.

€19.90*
Race Bobber front mudguard
Race Bobber front mudguard CB12564 / RS0
GRP front fender set with brackets and mounting hardware in Race Bobber style. This very short and beautifully narrow fender gives the front of your Bobber a completely different stalk. The fender is much more filigree than the original and is much closer to the front wheel. The included aluminum fender brackets have slotted holes to vary the height of the fender. So it fits perfectly with the original tires and all other tires in 16" or 17" dimension. The fender is supplied unpainted.

€249.95*
Sideway licens plate support Swingarm LC
Sideway licens plate support Swingarm LC CB11838 / RS1
Side license plate holder including LED license plate light.Small, discreet & unobtrusive. This is what a side license plate holder should look like. Beautifully close to the wheel with a round license plate, so that the license plate takes on the shape of the wheel.Important: For models such as the T120, Speed Twin etc., the license plate holder should only be used in conjunction with a short exhaust system due to the hot exhaust gases. Without expert opinion. From our experience, however, there are no problems with the green ones. Minimum dimensions that the license plate should have to completely cover the holder - length: 140mm / width: 90mm   Tips for complete rear conversion: In order to have a completely beautifully converted rear end on your Triumph, the bulky original mudguard must of course also be removed! We offer you two options for this.Option 1: You remove the original mudguard completely and replace it with our underbody plate. (As shown in the product pictures)Option 2: You install a shorter & narrower aluminum mudguard New blinker brackets must also be fitted if the original mudguard is removed. The accessories described can all be found under accessories in this product description.

€114.95*