This lamp holder kit moves the original headlight and speedometer of the Thruxton 1200 & Street Cup models further down. Very often and for a long time we sat in front of our Thruxton and thought that this is a sharp bike! But something just does not fit. Something is not right in the front part!After some considerations, drawings and a few beers we realized that the headlight and the speedometer are just too high. The position of the headlight spoils the nice, flat & straight line of the bike. So we developed a kit to lower the headlight and the speedo 4cm. Also the headlight moves 1,5cm closer to the bike and doesn't stick out as far to the front.The kit consists of 2 CNC milled aluminium lamp holders, a milled speedo lowering and screws.The lamp holders can be exchanged Plug & Play for the original ones. The speedo lowering is simply screwed between the speedo holder and the speedo. Assembly time approx. 10 minutes. Rarely have we had a part in our assortment that brings such a positive change to the motorcycle with so little effort. Because pictures say more than thousand words, just look at the pictures! IMPORTANT! click on the pictures and have a look at them in large size, because they are moving pictures, which show the change from original to lowering. The kit is available in deep black anodized and in raw aluminium.In raw aluminium the brackets and the lowering are perfect for polishing, it fits very well to the original triple clamp which is also polished on the Thruxton R. The Motul aluminium polish from our range is perfectly suited for this purpose (see accessories in this description). Polishing takes about 10 minutes (The pictures of the kit on wood show polished holders). Accessories: we also offer a schwarezn set of screws as accessories (see accessories in this description). The kit includes all visible screws on the lamp holders, in black.

This lamp holder kit offsets the original headlight and the speedometer of your Bonneville T120 & T100. Whenever you look at a Bonneville or see photos, you think yup a really chic classic, but something just does not fit 100%. Something is not right in the front part! The headlight and the speedometer sit just too high, which does not fit perfectly in the line of the bike.So we have developed a kit, with which the headlight and the speedometer is set about 3cm lower. Also, the headlight comes 2cm closer to the motorcycle.Due to the deeper seated speedometer, this nestles much better to the triple clamp even in the top view. So it looks like he would fit perfectly to the triple clamp and no longer as if he was just somehow screwed to it (see pictures).Also, a nice side effect is that the regulator has to be moved from in front of the triple clamp behind the water cooler. If you are worried that it might get too hot there, you are wrong. Triumph installs the same regulator on other models from the factory also behind the radiator. The lamp holders have an 8 hole, for mounting turn signals. Pretty much all accessory turn signals on the market have an M8 thread and thus fit into the hole (who wants to continue to use the original turn signals, you have to drill yourself a second hole). We recommend to the kit the Motogadget Tens or Pin turn signals, which simply fit best to the holders (see accessory article in this description).If you do not want to mount turn signals on the brackets, we recommend ordering a pair of turn signal plugs (see accessory items in this description). The kit consists of: Stainless Steel Heeadlight Holders Speedo lowering Regulator relocation Rarely have we had a part in our range that brings such a positive change to the bike with so little effort. Since pictures say more than a thousand words, just look at the pictures! IMPORTANT! click on the pictures and look at them in large, because then they are moving pictures that show the change from original to lowering. The kit is available in either Black (lamp holders are black powder coated) or Raw (the stainless steel lamp holders are hand brushed). All cables are long enough for mounting the regulator routing. All cables are long enough for mounting the controller routing. However, under certain circumstances, a piece of the wiring harness must be stripped in the steering head area, so that you have more cable length available. To insulate this again neatly, we offer a high quality fabric tape with, which you can find under the accessories in this description.An assembly instruction is of course also supplied. Our Alcatraz lamp grid fits especially well to the kit (is also installed on some of the product photos). The grid can also be found under the accessories in this description.

This lamp holder kit lowers the original headlight and speedometer of the Triumph Speed Twin. Very often and for a long time we sat in front of our Speed Twin and thought it was a nice bike! But something just does not fit. Something is not right in the front part! After some considerations, drawings and a few beers we realized that the headlight and the speedometer are just too high and look like foreign objects on the bike. The position of the headlight spoils the beautiful line of the bike. So we have developed a kit, with which the headlight as well as the speedometer is set 4cm lower (for the Euro 5 models, the speedometer is set 3cm lower and the headlight 2cm lower).Furthermore the headlight moves 1,5cm closer to the bike and doesn't stand out so far to the front anymore.Also you have a nice free view on the nice handlebar clamp, because it is not covered by the speedometer anymore.The kit consists of 2 CNC milled aluminium lamp holders, a milled speedo lowering and screws. The lamp holders can be exchanged Plug & Play with the original ones. The speedo lowering is simply screwed between the speedo holder and the speedo. Assembly time approx. 10 minutes. Rarely have we had a part in our assortment that brings such a positive change to the motorcycle with so little effort. Because pictures say more than thousand words, just look at the pictures! IMPORTANT! click on the pictures and have a look at them in large size, because they are moving pictures, which show the change from original to lowering. The kit is available in deep black anodized and in raw aluminium.In raw aluminium the holders and the lowering are perfect for polishing or painting in motorcycle colour.For polishing the Motul aluminium polish from our assortment is perfectly suitable (see accessories in this description). Polishing takes about 10 minutes (The pictures of the kit on wood show polished holders). Accessories: we also offer a schwarezn set of screws as accessories (see accessories in this description). The kit includes all visible screws on the lamp holders, in black.

Plug & Play speedometer bracket for mounting a Motogadget Tiny / Speedster / Vintage speedometer on a Triumph Bobber or Speedmaster. The scope of delivery includes all screws and sleeves that are needed for mounting. To get a clean finish and a nice look, we recommend to order the Motogadget outer cup (see accessories article in this description).

Plug & Play speedometer bracket for mounting a Motogadget Tiny / Speedster / Vintage speedometer on a Triumph Bobber or Speedmaster. The scope of delivery includes all screws and sleeves that are needed for mounting. To get a clean finish and a nice look, we recommend to order the Motogadget outer cup (see accessories article in this description).

This aluminum cover allows to get the original double instruments completely black. Recording sheet metal and rings are completely covered. Many disturb the silver and chrome on the instruments. But to paint them black is extremely costly and usually means that you damage parts.From Arton there is now the solution. These covers are completely milled from an aluminum block and anodized deep black. They are just 1mm thick, lie like a second skin on the instruments and are mounted in a short time. The covers are available in 2 versions.Version 1: The chrome speedometer rings remain visible and it is only the recording covered. Version 2: Tacho recording and speedometer rings are completely covered.   If you want to have your speedo completely in black, we recommend to order the black speedo discs (you can find them in the accessories section of this description). 

This aluminum die-cast cover allows to get the original double instruments completely black. Recording plate and rings are completely covered.Or now new in the polished real brass finish (for those who would like it more vintage, the brass can be lightly brushed). The new The Peerless is a much more affordable option compared to the Black Line covers we still carry. The main difference is that the Blackline covers are machined aluminum and the new Peerless covers are die cast aluminum. If you want to have your speedo completely black, we recommend to order the black speedo discs (you can find them in the accessories section of this description).

The black vintage discs replace the original ones of your Thruxton 1200 / R / RS / Speed Twin / Bonneville T100 / T120 & Street Cup The replacement is quite simple and quickly done 15-20 minutes approx. It will give the cockpit of your plane a completely different look (black is beautiful). All control displays etc. will of course remain the same. Please choose in the selection: Kmh or Mph version.

Die cast aluminum cover rings for the original Triumph dual speedometer instruments. The cover is simply plug & play over the original speedometer and fixed with a screw.

This mounting plate suitable for Motogadget Tiny & Speedster speedometers is plug & play on the Triumph Bonneville T100 / T120 - Street Twin / Cup / Scrambler - Speed Twin / Scrambler 900.The scope of delivery includes everything needed to mount the plate on the original handlebar clamp (including black stainless steel screws). The mounting plate is available in 2 versions:In front of the handlebars: Speedometer is mounted in front of the handlebarsBehind the handlebars: Speedometer is mounted behind the handlebars. With both versions, it is possible to leave the ignition lock in its original position. If you replace the original speedometer on your Triumph Bonneville T100 or T120 with a smaller one (e.g. one from Motogadget) you get an unsightly, unobstructed view of the ignition lock. We have developed a suitable cover for this. You can find it under the accessories in this product description.

The Twinton 7" headlight for Triumph Bobber & Speedmaster allows the original speedometer of the motorcycle to be fitted in the headlight with virtually plug & play. The headlight is available either as a simple H4 bulb headlight or as a modern LED headlight.Our recommendation is to invest the extra price for the LED headlight. This provides significantly better light and looks more stylish (unless you are totally into old school, in which case an H4 headlight is a must). This gives the front of the bike a very clean look, as the entire area in front of the handlebars is free. As the speedometer is not exactly small, it is very noticeable in its original position. By disappearing into the headlight housing, it is virtually no longer noticeable. The headlight housing is made from a very stable nylon polymide using the laser sintering 3D printing process. The lamp ring is chrome-plated metal.The original speedometer is simply attached to the fixed mounting points in the headlight housing. New lamp holders are also required for installation. We recommend the Twinton lamp holders specially developed for the headlight or the Next Gen holders (see accessory products in this description). Info on the H4 headlight: The scope of delivery does NOT include an H4 bulb. You can find a really good and bright bulb among the accessories in this description. The models that have an LED headlight fitted as standard require an adapter cable (see accessories). Size 7 inch. Manufactured using a selective laser sintering process. Material is a high-strength nylon polyamide 12. Chrome-plated housing ring with embossed glass insert. Diameter approx. 200 mm / depth 180 mm. Side mounting with M8 thread, distance approx. 200 mm. With E-mark, approved as main headlamp. Attention! Headlight cannot be fitted to the original mounting point.  Speedometer itself not included! Suitable lamp holders are required.

Mounting plate MSC-A Black or silver. 2 cylinders

Outside cup for the Motogadget Speedster, Vintage & Tiney.Required if the speedometer is not used in the headlight or similar.

Vintage Cup: Beautiful copper outer cup for mounting between the handlebars. The eyecatcher par excellence. Fits for Motoscope mst. Vintage. Available with mounting bracket for 22mm handlebars or 1 handlebars.

Motosign mini black control lamps

Motogadget MSM Bracket bracket c Black

Motogadget Combiframe for Motogadget Mini Tacho. The perfect holder for the mini speedometer with intriguing LED control lights (5 pieces). The retaining plate is also required for the mounting. Color: Black (other colors on request)

If you replace the original speedometer on your Triumph Bonneville T100 or T120 with a smaller one (e.g. one from Motogadget), you will have an unsightly, unobstructed view of the ignition lock. In order to have a nice front view on his Bonneville despite the small speedometer, we have developed the cover. The cover is manufactured in Germany using a 3D printing process. The material is a high-quality, carbon fiber-reinforced plastic, which is surface-finished after printing and painted black satin matt.

The lowering puts the original speedometer of the Bonneville T120 & T100 3cm lower. Thus, the machine gets a much nicer line, because the speedometer and the original headlight simply sit too high. In addition, the speedometer also nestles nicer to the upper triple clamp.Does NOT work together with the original lamp holders! We offer this lowering only for customers who have already installed other lamp holders (which are variable in height). For all others we offer a complete plug & play kit (with lamp holder & regulator relocation). See accessories article in this description. Longer screws for mounting the speedometer are included.

Since the speedometer and lamp holder are standard on the Stree Twin, it is not possible to replace the lamp holder.If you want to use a chic holder or another headlight (e.g. a smaller one or one with central mounting), you need exactly this holder to be able to mount the speedometer afterwards.Made of very robust die-cast to withstand the vibrations and shocks while driving without breaking.

The msc Streamline-Cup for 1 inch handlebars is suitable for the assembly of all Classic instruments. Elaborately turned from the solid / milled and highly polished Streamline Cup. Stable attachment with handlebar clamp to 1 inch / inch handlebars. A real eye-catcher for every custom bike.

The mst Groove Cup allows the installation of all analogue tokens of the series tiny at 22mm and 1 inch handlebars. Elaborately made from the solid turned / milled and black anodized Groove Cup for the series Tiny with stylish contrast milling. The mounting clamp is precisely lasered and bent from aluminum and allows a simple but safe mounting on the handlebar. The finish of the Groove Cup with the sculpted lines fits perfectly with the design of the instruments. Diameter 56 mm, length 60 mm.