€0.00*

Speed Twin EU5 Cafe Racer Alu front fender

€199.00*

Prices incl. VAT plus shipping costs

product-image
Pick your accessory
from €199.00*
product-image
Pick your accessory
from €199.00*
Product number: CB12472.2
item number: 211257723.GB
Product information "Speed Twin EU5 Cafe Racer Alu front fender"

Classicbike-Raisch aluminum front fender for Triumph Speed Twin 1200 Euro 5 models in cafe racer style.

Just like the Thruxton R / RS, a very wide fender is also installed on the Euro 5 Speed Twin, as well as the bulky plastic holders. Such a bulky front fender does not exactly underline the sporty line of the Speed Twin.
To get the front wheel area of the Speed Twin more filigree and coherent with the motorcycle, we have designed minimalist aluminum holders, which are made in Germany and coated in black powder.
In addition, a beautifully narrow, 500mm long aluminum fender with flared edge is installed. The fender is much flatter over the tire than the original and is also much narrower, so that the tire is more visible.
We also offer the fender set as a short version with a 300mm fender (see similar items in this description).

The fender is supplied including black holder.

Optionally, the fender is available in polished, matt brushed or black powder-coated.
Also ideally suited for painting, for this best to talk in advance with the painter of confidence, whether he wants to have the fender in aluminum polished or better coated in black (because the coating is already a little like a primer, say here you can not expect a smooth surface as with a paint job).

Black high gloss powder coated: This coating comes, by the extremely high-quality powder that is used, a black glossy paint really very close (see photos)!
But you can't expect a 110% perfect surface like from a painter who primed and sanded the fender before.

The last photos are example pictures to show the difference between matt & gloss black.

Triumph LC models from 2016:
  • Thruxton 1200 R
  • Thruxton 1200 RS
Triumph LC ab 2016
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
0
0
0
0

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.

Zubehörartikel

HeckWeck Kit - Thruxton 1200
HeckWeck Kit - Thruxton 1200 CB10948M / -1
Classicbike-Raisch rear wake kit for Thruxton 1200 - R - RS - TFC. So nice clean & tidy should look the tail of a CafeRacer. Precise own production from aluminum and black powder coated. Turn signal holder: These must be ordered separately. You will find two different turn signal holders below the description. Turn signal holder Vario: The turn signals are attached directly to the license plate with the Vario turn signal holders (the turn signal holders can be adjusted in width so that each turn signal sits in the perfect position for each license plate width).This version is legal & StvO compliant. Turn signal holder rear shocks: The turn signals are mounted with a retaining plate from the inside of the strut. When the ignition is off you almost think the bike has no turn signals on it (but you can see them well enough when they light up). However, is not Stvo compliant, because the turn signals are too far in the rear). Due to the rear under fairing (lower shell) there is a good splash protection. A LED license plate light with E-number is also included. It also comes with a plug that fits into the original wiring harness. That is, only turn signals, lights, etc. must be crimped and can then be connected without having to change anything on the wiring harness. All other cables, connectors, screws, etc. that are needed for installation are of course also included. Since the HeckWeck kit does NOT have a central tail light, it is mandatory to have 3in1 turn signals (these combine turn, tail & brake light in one turn signal).Further down in this description you can order the turn signals in a set and get 10% discount on the turn signals.All turn signals listed here are with E-number and street legal. The conversion succeeds even less experienced screwdrivers without problems (because we pack a detailed installation instructions). Resistors are not necessary, because the flashing frequency can be adjusted via the menu. Who does not dare to make the wiring for the lighting itself or simply does not feel like it, can order the ready wiring (accessory article HeckWeck Kit / LC under the 3-1 turn signals).   If you want to have it 100% correct for TÜV & police, you can order a reflector (accessory article HeckWeck Kit / LC under the 3-1 turn signals). In addition, we recommend our license plate screw set to order to mount the license plate can be beautiful (accessory article HeckWeck Kit / LC under the 3-1 turn signals). 

From €199.00*
Details

Ähnliche Artikel

Speed Twin EU5 Alloy Fender - Short
Speed Twin EU5 Alloy Fender - Short CB12473.2M / -10
Classicbike-Raisch Short aluminum front fender for Triumph Speed Twin 1200 Euro 5 models. Just like the Thruxton R / RS, the Euro 5 Speed Twin has a very wide fender as well as the bulky plastic brackets. Such a bulky front fender does not exactly underline the sporty line of the Speed Twin. To get the front wheel area of the Speed Twin more filigree and more coherent to the motorcycle, we have designed minimalist aluminum holders, which are made in Germany and coated black powder. For this purpose, a beautifully short / narrow, 300mm long aluminum fender with flared edge is installed. The fender is much flatter over the tire than the original and is also a lot narrower, so the tire is more visible. We also offer the fender set as a cafe racer version with a 500mm fender (see similar items in this description). The fender is delivered including black holder. Optionally, the fender is available in polished, matt brushed or black powder-coated. Also ideally suited for painting, for this best to talk in advance with the painter of confidence, whether he wants to have the fender in aluminum polished or better coated in black (because the coating is already a little like a primer, say here you can not expect a smooth surface as with a paint job). Black high gloss powder coated: This coating comes, by the extremely high-quality powder that is used, a black glossy paint really very close (see photos)! But you can't expect a 110% perfect surface like from a painter who primed and sanded the fender before. The last photos are example pictures to show the difference between matte & gloss black.

From €199.00*
Details
This website uses cookies to ensure the best experience possible. More information...