Triumph Tail light replacement for 3-1 indicator
| Product number: | CB12101 |
| item number: | A9700589 |
Product information "Triumph Tail light replacement for 3-1 indicator "
This Triumph taillight replacement for the for various Triumph models allows to dismantle the original taillight and 3-1 turn signals (turn signals with integrated taillight to install).
To get a nice solution (as on the product images), the Raisch turn signal adapter is needed (you can order below the description simply in the set to. This then allows all accessories 3-1 turn signals with M8 thread to mount.
In addition, we also recommend the cable set for easier wiring to order (Attention for the Speed Twin Euro 5 models there is no cable set, these models must be wired manually).
Matching turn signals to the set you can order with 10% discount, below the description in the set. Our recommendation for this set are the turn signals of the brand Rizoma, which fit perfectly.
Tip Scrambler / Speed Twin 1200: To get a really cool and clean tail on these models, we recommend a short license plate holder to order (see accessories below the description).
The aluminum plate with the Triumph emblem is supplied in silver.
| Triumph LC ab 2016 |
Bobber 16" / Bobber Black EU 4
Bobber 16" / Bobber Black EU 5
Bobber 19"
Bonneville T100 EU 4
Bonneville T100 EU 5
Bonneville T120 EU 4
Bonneville T120 EU 5
Scrambler 1200 XC / X EU 4
Scrambler 1200 XC / X EU 5
Scrambler 1200 XE EU 4
Scrambler 1200 XE EU 5
Speed Twin 1200 EU 4
Speed Twin 1200 EU 5
Speedmaster EU 4
Speedmaster EU 5
Street Cup
Street Scrambler / Scrambler 900 EU 4
Street Scrambler / Scrambler 900 EU 5 - Street Scrambler / Scrambler 900
Street Twin / Speed Twin 900 EU 4
Street Twin / Speed Twin 900 EU 5 - Street Twin / Speed Twin 900
Thruxton 1200
Thruxton 1200 R
Thruxton 1200 RS
|
|---|
500
500
500
500
There aren't any asked questions yet.
Zubehörartikel
Triumph Bullet turn signal / tail light combination
CB11817 / 600
€219.00*
These Triumph turn signals combine tail light, brake light & turn signal in one housing, which allows you to drive without a central tail light on the motorcycle (legal).
Simply order the model specific rear light replacement plates for the Scrambler or Speed Twin and you have your complete rear conversion kit. (See accessories in this description).
License plate holder Short Speed Twin
CB11930 / 0
€79.95*
Short number plate holder for Triumph Speed Twin 1200 made of stainless steel and black powder coated.
The perfect and most minimalist number plate for the original aluminium mudguard of the Speed Twin.
We have made the licence plate holder extra small for the new version, so that the licence plate holder can be used for any country in the world.Dimension (height x width): 100mm x 160mmWe now also offer additional Vario indicator holders that can be mounted on the licence plate holder (optional / you will find the holders under the accessories in this description).
The holder replaces the ugly and much too long original plastic licence plate holder.Mounting material, licence plate holders and detailed step-by-step mounting instructions are included.
If you want to make your tail even cleaner, you can replace the original tail light with 3-1 turn signals / tail light combination turn signals. To do this, you need the "Triumph tail light replacement for 3-1 turn signals" kit (see accessories article).
The number plate light disappears nice and deep into the mudguard and is hardly visible. This way the number plate moves nice and close to the mudguard.
No ABE, certificate or similar is required for our short licence plate holder. It complies with the StvO and does not need to be registered. Simply install it and you can continue to ride legally. In order to ride completely legally, a reflector must of course be installed. You can either use the original one (which we do not recommend, as it is very large) or you can order the small reflector from our range (see accessories in this description).To mount the annoying number plate as discreetly as possible, we offer an optional number plate screw set (see accessory article).We have taken great care in the design to ensure that the holder does not come into contact with the rear wheel even at maximum compression, which is not the case with all holders on the market.
License plate holder Short Scrambler 1200
CB11856 / 0
€79.95*
Short license plate holder for Triumph Scrambler 1200 XC & XE made of 3mm stainless steel and black powder coated.ATTENTION! The set is without turn signal holder, these must be ordered separately (see accessory items in this description).
The perfect and most minimalistic license plate for the original aluminum fender of the Triumph Scrambler 1200.We have made the license plate holder extra small for the new version, so that the license plate holder can be used for any country in the world.Dimension (height x width): 100mm x 160mm
The license plate holder does not have turn signal holders. This must be ordered separately (see accessory items in this description). There are 3 different turn signal holders to choose from: 1: The vario turn signal holder. These can be adjusted in width to ensure the appropriate distance for each license plate with each turn signal.2: Turn signal adapter - Scrambler 1200: These are attached to the frame and not to the license plate holder.3: The 3-1 turn signal/tail light combination kit is installed. The original tail light is replaced by turn signals with integrated tail and brake light.
The holder replaces the ugly and much too long, original plastic license plate holder as well as the license plate light.Mounting hardware, license plate holder, LED license plate light and detailed step by step mounting instructions are included.
Classicbike-Raisch tip:If you want to build a really nice rear end with the original mudguard on your Scrambler, we recommend ordering our Plug & Play LED rear light (can be seen in some product photos).You can find the rear light under accessories in this product description.
The original plastic holder is partially preserved. It must be trimmed a little to be able to mount ours. Is quite simple and also described in the instructions (who wants to look before whether he trusts himself, can download the instructions under Downloads in this description as a PDF).If you want to upgrade the bike back to the original holder, you need the plastic license plate holder new (we also offer as a spare part, see accessories in this description).
The license plate light disappears nice and deep in the fender and is hardly visible. So the license plate moves nice and close to the fender.Turn signal holder are integrated directly on the license plate holder. Thus, the turn signals sit nicely discreet left & right next to the license plate. With all turn signals the prescribed minimum distance is maintained.The original Triumph turn signals can NOT be used.
For our short license plate holder is no ABE, certificate or similar necessary. It complies with the StvO & does not need to be registered. Say simply install and you are still legally on the road. To drive completely legally, of course, a reflector must be installed again. For this you can either take the original (which we do not recommend, because this is very large) or you order the small reflector from our range in addition (see accessories in this description).To mount the annoying license plate as discreetly as possible, we offer an optional license plate screw set (see accessory article).In the design we have paid meticulous attention to the fact that the holder does not get contact with the rear wheel even at maximum compression, which is not given with all holders on the market.